Best current price£1.97from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£1.97Visit shop Plumbright Copper Press-Fit Fitting 45 Degree Elbow 15Mm 6041M.15b
Visit shop1 offer from £1.97
View price history by clicking the chart icon.
The Plumbright 15mm 45-Degree Copper Press-Fit Elbow is an ideal choice for professional plumbers and DIY enthusiasts who require secure, heat-free pipe joints in domestic, commercial, or industrial water systems. Its primary benefit lies in the speed and efficiency of the press-fit technology, which eliminates the need for hot work or soldering; however, users should note that these fittings require a compatible M-Profile pressing tool to ensure a leak-proof, permanent connection.
| Model Part Number | 6041M.15B |
|---|---|
| Brand | Plumbright |
These fittings are intended for water plumbing applications; always check local building codes for specific gas-line fitting requirements.
No, the press-fit technology relies on an internal O-ring to create a mechanical seal; chemical sealants are unnecessary and may interfere with the joint.
No, once a press-fit connection has been made, the fitting is permanently deformed and must be cut out and replaced with a new one.
The fittings are designed to handle standard domestic and commercial plumbing pressures, but please refer to the specific technical data sheet for your installation's pressure limits.
No, this fitting is explicitly manufactured for M-Profile jaws. Using the wrong profile will result in an inadequate seal and potential leaks.
Verify the pipe was fully inserted into the fitting to the marked depth and ensure the M-Profile jaw was aligned correctly during the press cycle.
Check that the pipe end is properly deburred and rounded; a crushed or rough pipe end will catch on the internal O-ring seal.
This usually indicates the pressing cycle was incomplete or the wrong jaw profile was used. Re-check the calibration of your press tool.
Ensure that the copper pipe being used meets standard dimensions for 15mm copper tube. Always deburr the pipe ends to remove sharp edges that could damage the internal O-ring seal during insertion. Use a professional-grade M-Profile press tool and verify the jaws are free of debris before operation.
This fitting is designed exclusively for 15mm copper pipe and M-Profile pressing equipment. Do not attempt to use this fitting with PEX, stainless steel of varying grades, or incompatible press-jaw profiles.
Store fittings in a clean, dry location to prevent oxidation of the copper surface or debris accumulation within the seal area. Inspect the O-ring inside the fitting for any visible tears or damage prior to installation.
