Best current price£4.33from Travis Perkins
Shopping.co.uk recommended and popular offers
Travis Perkins£4.33Visit shop Wavin Osma RoundLine pipe connector 68mm white 0T024W
Visit shop1 offer from £4.33
View price history by clicking the chart icon.
The Wavin Osma RoundLine 68mm Downpipe Connector is the ideal solution for homeowners and professional installers looking to extend or join 68mm downpipes within the RoundLine guttering system. It offers a secure, weather-tight connection with a clean, concealed aesthetic that hides cut pipe edges. While it provides excellent structural integrity for domestic drainage, it is specifically optimized for the 112mm gutter system and requires precise alignment for a flush, professional finish.
| Model Part Number | 0T024W |
|---|---|
| Brand | Osma |
No, this connector is specifically designed for the 68mm RoundLine circular downpipe system.
The Wavin Osma RoundLine system is designed for push-fit installation; adhesive is generally not required.
The 163 square metre limit is for a single downpipe configuration. Exceeding this may cause overflow; consider adding a second downpipe for larger roofs.
No, the connector is a standalone fitting. It is recommended to use the `0T038W` socket bracket separately.
Ensure the pipe ends are cut square and are pushed fully into the internal central register of the connector.
Ensure the pipe is pushed fully into the socket and add an `0T038W` socket bracket nearby for additional support.
Check that the cut end of the downpipe is free of burrs or jagged plastic; sand the edge lightly if necessary.
Verify that the pipe is inserted past the internal stop and check for any debris inside the connector socket before re-seating.
To install, ensure the downpipe ends are cut squarely to allow full insertion into the connector's internal stops. It is highly recommended to pair this connector with the `0T038W` socket bracket to prevent pipe sagging and ensure the joint bears the weight of the water-filled pipe correctly. For long-term care, clear the downpipe annually to prevent debris build-up, which can put unnecessary pressure on joints. Use a silicone lubricant if the fit is too tight, but avoid harsh chemical solvents that could degrade the plastic finish.
