Best current price£45.00from eBay
Shopping.co.uk recommended and popular offers
eBay£45.00Visit shop Octoral Spot Primer 1K Aerosol Spray Can Mid Grey 400ml PA7 Quick Drying x3
Visit shop2 offers from £45.00 - £48.00
View price history by clicking the chart icon.
The Octoral Spot Primer 1K Aerosol Spray is designed for professional automotive refinishers and DIY enthusiasts who need a reliable, quick-drying solution for small-scale paint repairs. Its primary benefit is the ability to provide excellent coverage and high-quality adhesion on sand-through areas, creating a consistent base for topcoats. While highly convenient for spot repairs, users should note that as a 1K formula, it is best suited for small areas rather than full-panel refinishing projects.
| Colour | Grey |
|---|---|
| Model Part Number | Octoral Spot Primer 1K aerosol spray can 400ml |
| Brand | Octoral |
This is a 1K (one-component) primer, meaning it does not require an activator or hardener to cure.
It is not recommended for full panels. It is designed specifically for spot repairs and sand-through patches.
The formula is quick-drying, but exact times vary by ambient temperature and humidity. Always check for a matte, dry-to-touch finish before sanding.
Always purge the nozzle after use by turning the can upside down and spraying until clear.
Yes, it is designed as a base to provide excellent adhesion for your topcoat.
Yes, this Octoral 1K Spot Primer is fully VOC compliant.
Invert the can and spray for 3-5 seconds to clear the valve. If it remains clogged, remove the nozzle and soak it in a mild solvent.
Apply thinner coats and increase the distance between the can and the surface. Allow for proper drying time between passes.
Ensure the surface was adequately sanded and cleaned of all grease or silicones before the first coat.
To achieve the best results, ensure the substrate is thoroughly cleaned and free of debris, oil, or rust. Shake the aerosol can vigorously for at least two minutes before use to ensure the pigments are well-mixed. Apply the primer in light, overlapping passes from a distance of approximately 15-20cm to avoid runs. After use, invert the can and spray for a few seconds to clear the nozzle, preventing clogs. Store the can in a cool, dry place away from direct sunlight or extreme temperature fluctuations.
