Trade Coatings Internal Mdf Wood Sealer - White

Trade Coatings MDF Sealer is a high-performance, single-pack sealer specifically formulated for us...

Best current price£41.00from DIY Refurb UK

All Offers

6 offers from £41.00 - £115.00

View price history by clicking the chart icon.

DIY Refurb UKTrade Coatings Mdf Sealer For Mdf Board, Mdf Edges - 5/10/20L
Free delivery in 1–3 days
£41.00
Visit shop
B&QB&Q - Internal Mdf Wood Sealer5L
Free delivery in 1–3 days
£43.00
Visit shop

Product Information

Full details

The Trade Coatings Internal MDF Wood Sealer is designed for professional joiners, furniture makers, and DIY enthusiasts who require a reliable base coat to ensure a flawless topcoat finish on Medium Density Fiberboard. Its primary benefit is providing a smooth, non-swelling surface that protects the integrity of the board during the painting process, though users must note that it requires proper sanding preparation to achieve optimal results.

All features

ColourWhite
Model Part Numbermdf5
BrandTrade Coatings

Extended Product Information

FAQs

Can I use this sealer for outdoor furniture?

No, this product is formulated specifically for interior MDF joinery and furniture projects.

Does this sealer hide the MDF texture completely?

It provides an excellent base, but you must sand it properly to ensure the texture is leveled before topcoating.

How many coats are recommended?

Usually, one to two coats are sufficient, depending on the porosity of the MDF edges.

Is it compatible with all paint types?

It is designed to be compatible with most standard interior topcoats, but always test on a scrap piece if using specialized finishes.

What is the coverage per litre?

You can expect approximately 12m² per litre, though this may vary based on the absorption rate of the MDF.

Troubleshooting

Sealer feels rough after drying

This is normal for MDF as moisture raises the wood fibers; simply sand the surface lightly with fine-grit sandpaper until smooth.

Topcoat is not adhering well

Ensure the sealer was fully cured and that the surface was wiped free of sanding dust before applying the final topcoat.

Pros and Cons

Pros

  • Prevents MDF from swelling or warping when exposed to moisture
  • Fast-drying nature speeds up the painting process
  • Provides a superior foundation for professional-grade topcoats
  • Applicable via various methods including spray equipment
  • Easy to sand back to a glass-like finish

Cons

  • Requires careful surface preparation for best adhesion
  • Limited to interior use only
  • Must be applied in a well-ventilated area due to chemical formulation

Setup, Compatibility & Care

Before application, ensure the MDF surface is clean, dry, and free of dust. Sand the raw MDF lightly to remove any fuzz or loose particles. Apply the sealer using a high-quality synthetic brush, a short-nap roller, or a spray gun. Once the initial coat is dry, inspect the surface for any raised fibers and perform a light sand before applying your chosen topcoat. Store the container in a cool, dry place, ensuring the lid is sealed tightly to prevent skinning. Clean your brushes or spray equipment promptly after use with the appropriate solvent as recommended for single-pack systems.

Similar items

Price History

DatePrice
Visit shop