Qettle Signature Classic 4 in 1 Instant Boiling Water Tap 7 Litre - Red

All about meQETTLE Signature Classic 100°C 4 in 1 7L PV - Stainless Steel with one lever button ha...

Best current price£945.00from Appliances Direct (BID)

All Offers

2 offers from £945.00

View price history by clicking the chart icon.

Appliances Direct (BID)Qettle Signature Classic 4 In 1 Instant Boiling Water Tap 7 Litre Stainless Steel Q9741
£6.95 delivery
£945.00
Visit shop
Drones Direct (BID)Qettle Chrome Signature Classic 4 In 1 Instant Boiling Water Tap 7 Litre - Stainless Steel
Free delivery in 1–3 days
£945.00
Visit shop

Product Information

Full details

The QETTLE Signature Classic 100°C 4 in 1 7L PV tap in Red is designed for busy kitchens, offering instant 100°C boiling water, filtered drinking water, and standard hot and cold flows from a single, stylish fixture. Its primary benefit is saving time and effort in daily tasks like preparing hot drinks, cooking, and filling pans. A key consideration is the requirement for regular filter replacement and annual tank cleaning to maintain performance and water quality.

All features

ColourRed
Model Part NumberQ9741
BrandQettle

Extended Product Information

FAQs

How often should I replace the filter cartridge?

The filter cartridge should be replaced every six months to ensure optimal performance and water quality.

How do I clean the boiler tank?

A deep clean of the boiler tank is recommended annually. This typically involves draining the tank and cleaning it according to the manufacturer's instructions. Specific details can be found in the user manual.

What is the warranty period for the QETTLE tap?

The QETTLE Signature Classic 4 in 1 tap comes with a 2-year warranty.

Can I install the tap myself?

While some users may be comfortable with DIY plumbing, professional installation is recommended to ensure correct setup and to avoid potential issues with water connections and electrical supply.

What is the capacity of the boiler tank?

The boiler tank has a capacity of 7 litres.

Is the cool-touch spout completely safe?

The spout is designed to be cool to the touch, except for the very tip, significantly reducing the risk of burns during normal use. However, caution should always be exercised when dispensing boiling water.

What pressure is required for the tap to function correctly?

A minimum water pressure of 1 Bar is required for proper operation, with a minimum flow rate of 6.0 litres per minute.

Troubleshooting

No hot or cold water dispensing.

Check that the main water supply valves are open and that there are no kinks in the hot and cold water hoses.

Boiling water not dispensing or not hot enough.

Ensure the boiler tank is powered on and has reached its operating temperature. Check the filter is correctly installed and not blocked. If the issue persists, the boiler may require professional inspection.

Filtered water tastes unusual.

This usually indicates the filter cartridge needs replacement. Replace the filter cartridge as per the care instructions.

Tap is leaking.

Check all plumbing connections are secure. Ensure any seals or O-rings are correctly seated. If leaking persists from the tap body, contact customer service.

Boiling water button is stiff or hard to operate.

Ensure there is no debris around the button mechanism. Occasionally, limescale can affect operation; a gentle clean might help. If it remains difficult, seek assistance.

Pros and Cons

Pros

  • Saves significant time on daily kitchen tasks.
  • Combines multiple water functions into one tap, reducing clutter.
  • Enhanced safety features make it suitable for families.
  • Durable construction with marine-grade stainless steel.
  • Improves water taste and quality with filtration.

Cons

  • Requires regular filter replacement (twice a year).
  • Annual deep cleaning of the boiler tank is recommended.
  • Initial installation may require professional assistance.
  • Boiling water dispensing requires a specific two-step action, which might take a moment to get used to.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure you have adequate space under your sink for the 7L boiler tank and filter system.
  2. Connect the tap to your existing hot and cold water mains supply using the provided tails.
  3. Connect the four separate inlet hoses from the boiler tank to the appropriate water sources (hot, cold, filtered, boiling).
  4. Install the Q08 filter cartridge into its housing.
  5. Connect the power cable to the boiler tank and plug into a suitable electrical socket.
  6. Follow the detailed instructions provided in the box for plumbing and wiring.

Compatibility:

  • Minimum Pressure: 1 Bar (with a flow rate of 6.0 litres per minute).
  • Maximum Pressure: 3.0 Bar (with a flow rate of 8.0 litres per minute).
  • Inlet Size: G 1/2 F for Hot and Cold mains, 15mm Stop Valve for Filter.
  • Voltage/Wattage: 220-240V.

Care:

  • Filter Replacement: Replace the QETTLE filter cartridge every six months. This is crucial for maintaining water quality and taste.
  • Boiler Tank Cleaning: Perform a deep clean of the boiler tank annually. This involves draining and cleaning the tank to remove any sediment build-up.
  • Tap Cleaning: Clean the exterior of the tap with a damp cloth. Avoid abrasive cleaners that could damage the polished stainless steel finish.

Price History

DatePrice
Visit shop