Best current price£13.23from The Range
Shopping.co.uk recommended and popular offers
The Range£13.23Visit shop Jcp Fixings Alloy Nail-In Anchors - 6 X 30Mm (Box Of 100) - Silver
Visit shop15 offers from £13.23 - £19.50
View price history by clicking the chart icon.
JCP Fixings Alloy Nail-In Anchors are designed for DIY enthusiasts and professionals seeking a reliable and durable fastening solution for walls, ceilings, and various substrates. Their primary benefit is quick and secure installation, making them ideal for hanging heavier items. A potential caveat is ensuring the substrate is suitable for this type of anchor. Key features include high-quality alloy construction, a convenient 6 x 50mm size, and a simple nail-in design for efficient use.
| Colour | Silver |
|---|---|
| Model Part Number | Fjlani06050 |
| Brand | JCP Fixings |
They are made from high-quality alloy and are zinc-plated and galvanised for durability and corrosion resistance.
The anchors are 6mm in diameter and 50mm in length.
A box contains 100 anchors.
They can be used in denser types of drywall or plasterboard, but for hollow walls or very soft plasterboard, other anchor types might be more suitable. Always test in an inconspicuous area if unsure.
You will need a hammer to drive the nail into the anchor and a drill with the appropriate sized drill bit to create the pilot hole.
The zinc-plated galvanised alloy offers good corrosion resistance for standard indoor use. For direct outdoor exposure, their longevity may be reduced depending on environmental conditions.
Nail-in anchors are generally considered permanent fixings and are difficult to remove without damaging the surrounding substrate. If removal is necessary, it often involves cutting off the protruding part and potentially chiseling it out.
Ensure the pilot hole is the correct diameter and depth. The substrate material may be too soft or crumbly.
Verify the pilot hole size. If too small, the nail will resist. If the hole is too large, the anchor may not grip effectively.
The substrate may not be dense enough for this type of anchor. Consider using a different type of fixing appropriate for the wall material.
Ensure the nail is hammered fully flush with the anchor's head. Gentle persuasion with a hammer may be needed.
Setup:
Compatibility:
These anchors are generally compatible with solid walls (brick, concrete) and denser plasterboard. They are less suitable for very soft materials, aerated blocks, or hollow walls where they might not achieve adequate expansion. Always check the load-bearing capacity of the chosen substrate before use.
Care:
As these are typically single-use fixings once installed, ongoing care is minimal. The zinc-plated galvanised alloy offers good corrosion resistance for standard indoor use. For environments with high humidity or exposure to moisture, monitor for any signs of degradation over time. Ensure the area around the fixing remains clean and dry.
