Best current price£52.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£52.50Visit shop B&Q - J-B Weld Steelstik Reinforced Epoxy Putty (6 Pack)57G (2Oz) Dark Grey Sticks5-Minute Set Time4000 Psi Strength
Visit shop2 offers from £52.50
View price history by clicking the chart icon.
This 6-pack of JB Weld SteelStik Reinforced Epoxy Putty is designed for professionals and DIYers needing a strong, reliable repair for metal surfaces. Its key benefit is the high-strength, steel-reinforced bond that cures quickly and can be machined afterwards, offering minimal downtime and a finish that can be customized. A minor caveat is its rapid 5-minute set time, which requires efficient application for larger repairs.
| Colour | Grey |
|---|---|
| Brand | JB Weld |
JB Weld SteelStik has a working time of approximately 5 minutes after kneading.
The putty can be handled after about 1 hour, but it achieves its full strength (4000 PSI) after 12-24 hours, depending on ambient temperature and humidity.
SteelStik is specifically designed for metal repairs. It may adhere to some plastics, but performance and durability are not guaranteed. It is not recommended for wood.
Yes, once fully cured, JB Weld SteelStik is waterproof and suitable for submerged applications.
Yes, once fully cured, the putty can be sanded, primed, and painted to match the surrounding surface.
Store unused putty sticks in their original packaging in a cool, dry place. Ensure the packaging is sealed tightly to prevent air exposure.
When stored properly in its original, sealed packaging, JB Weld SteelStik typically has a shelf life of 2-3 years.
Ensure the putty was kneaded thoroughly until a uniform grey color was achieved. Incomplete mixing is the most common cause. Check the expiration date, as old putty may not cure properly.
The surface may not have been properly prepared. Ensure it is completely clean, dry, and free of rust, grease, oil, or paint. Lightly abrading the surface before application can improve adhesion.
For larger repairs, consider using smaller batches of putty or having all necessary tools and materials ready before starting to mix. Work quickly and efficiently.
Allow the putty to cure fully for the recommended time (typically 1 hour for handling, 12-24 hours for full cure depending on conditions) before attempting to machine. Ensure tools are sharp.
Setup:
Compatibility:
SteelStik is primarily designed for bonding and repairing ferrous metals, including steel and iron. It is also effective on some non-ferrous metals. Ensure the surfaces to be bonded are clean, dry, and free from grease, oil, or rust.
Care:
Store unused putty sticks in their original packaging in a cool, dry place, away from direct sunlight. Ensure the packaging is properly sealed to prevent premature curing. Wear gloves during application to avoid skin contact. After use, wash hands thoroughly with soap and water.
