Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Re...Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. This is a budget friendly solution for covering surfaces in your home. The self-adhesive vinyl wrap can be used to cover worktops, it’s heat resistant to 75C and durable to clean. This is a non-permanent DIY solution and is completely removable, ideal for tenants or landlords looking for a quick fix. Wrap doors and drawers in your kitchen or bedroom, turn shabby to chic with these amazing realistic designs! Application :- 1) Use a dc fix application kit to apply, it won’t damage the vinyl when smoothing out and includes a handy cutting tool 2) Overlap the vinyl wrap film a few mm to allow for shrinkage when joining on a worktop for example 3) The vinyl can be applied around sinks, cut out the sink area and trim any excess 4) The vinyl has a handy grid on the backing paper, to use as a cutting guide 5) The vinyl can be difficult to manoeuvre on surfaces like glass and appliances, lightly spray water first 6) Shaker style doors can be covered, cut each section separately and overlap the vinyl joins by a few mm 7) Use a hairdryer on curved surfaces, it warms the vinyl wrap film making it more pliable for tricky edges Aftercare :- 1) To ensure your surface is water tight, use silicone sealant around sinks and hobs for example 2) Wipe clean using regular household cleaner, do not scrub the vinyl and wipe spillages that may stain immediately e.g. curry 3) Do not cut or move sharp objects around on the vinyl, it will damage it – always use worktop savers to protect the vinyl 4) Heat resistant to 75C, so hot plates and cups are fine, but not hot pans, keep 12 inches away from naked flames dc fix Brand :- Made in Germany and it shows, with a 5 star rating for adhesion, opacity, lightfastness, shrinkage and durability. Unlike solvent based adhesives, dcfix has a water based low tack adhesive that allows you to reposition the vinyl during application, it then bonds fully within 24 hours, remove using heat from a hairdryer. High Quality dc fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability.
This guide is designed for DIY enthusiasts and renters looking to quickly and affordably update their homes. The D-C-Fix self-adhesive vinyl wrap offers a simple way to rejuvenate surfaces like worktops and furniture, saving you money and time. A key benefit is its ease of application and removability, perfect for temporary fixes. However, keep in mind that the heat resistance is limited to 75°C, so be mindful of hot items.
All features
Brand
d-c-fix
Extended Product Information
FAQs
How do I clean the vinyl wrap?
Wipe clean with a damp cloth and regular household cleaner. Avoid abrasive cleaners or scrubbing.
Can I use it on a kitchen worktop?
Yes, it is suitable for worktops and is heat resistant up to 75°C. Always use trivets for hot pans.
Is it truly removable?
Yes, it is removable. Use a hairdryer to warm the vinyl and gently peel it off. Any remaining residue can be cleaned with warm soapy water.
What if I make a mistake during application?
The water-based adhesive allows for repositioning. Simply peel back the vinyl and reapply. Remember to smooth out bubbles as you go.
What tools do I need to apply the vinyl?
You will need a D-C-Fix application kit (includes a smoothing tool and cutting tool), a measuring tape, a utility knife or sharp scissors, and a hairdryer.
How long will the vinyl last?
With proper care and maintenance, the vinyl can last for several years. It has a 5-star rating for durability.
Can I use it on textured surfaces?
It is best suited for smooth, non-porous surfaces. It may not adhere well to textured surfaces.
Is it waterproof?
It is water-resistant. For areas exposed to water, such as around sinks, use silicone sealant to ensure a watertight seal.
Troubleshooting
Bubbles or creases appear after application.
Gently lift the vinyl and reapply, smoothing out the bubbles with a smoothing tool or soft cloth. Use a pin to release any stubborn air bubbles.
Vinyl doesn't stick properly.
Ensure the surface is clean and dry. Use a hairdryer to activate the adhesive, especially on edges and corners. Allow 24 hours for full adhesion.
Edges are peeling up.
Use a hairdryer to warm the edges and press them firmly. Seal the edges with silicone sealant for added protection.
Difficult to manoeuvre on glass or appliances.
Lightly spray the surface with water before applying the vinyl. This will allow for easier repositioning.
Pros and Cons
Pros
Easy to apply with repositionable adhesive.
Removable, making it ideal for renters and temporary updates.
Cost-effective alternative to replacing furniture or surfaces.
Wide range of realistic designs available.
Durable and long-lasting with a 5-star rating.
Simple to clean and maintain.
Cons
Limited heat resistance (75°C), requiring care with hot items.
Requires careful application to avoid bubbles and creases.
Edges may be vulnerable to wear and tear over time.
Not suitable for extremely high-traffic areas.
May require some practice to achieve professional-looking results.
Sharp objects can damage the vinyl, so use worktop savers.
Setup, Compatibility & Care
To apply D-C-Fix vinyl wrap:
Preparation: Clean the surface thoroughly and ensure it is dry.
Application Kit: Use a D-C-Fix application kit for smooth application and cutting. This will also protect the vinyl.
Cutting: Use the grid on the backing paper as a cutting guide.
Application: Peel back a small section of the backing paper and apply the vinyl, smoothing out any bubbles as you go. Reposition as needed thanks to the low-tack adhesive.
Curved Surfaces: Use a hairdryer on curved surfaces to make the vinyl more pliable.
Sealing: Use silicone sealant around sinks and hobs to ensure a watertight seal.
Compatibility: D-C-Fix is compatible with most smooth, non-porous surfaces. It may not adhere well to rough or textured surfaces.
Care: Wipe clean with regular household cleaner. Avoid scrubbing or using abrasive cleaners. Protect the vinyl from sharp objects and direct heat from hot pans or flames.