Best current price£178.00from eBay
Shopping.co.uk recommended and popular offers
eBay£178.00Visit shop Clarke CBP900 1"" 900W 97LPM 32M Head Multi-Stage Booster Pump (230V) New Model
Visit shop
B&Q£178.32Visit shop B&Q - Clarke Cbp900 1" 900W 97Lpm 32M Head Multi-Stage Booster Pump (230V)
Visit shop2 offers from £178.00 - £178.32
View price history by clicking the chart icon.
The Clarke CBP900 is a powerful 900W multi-stage booster pump designed for boosting or maintaining mains water pressure in domestic and light commercial settings. Its key benefit is delivering reliable, high-volume water flow with automatic operation, though its 32m head limitation means it's best suited for moderate pressure boosting needs. Key features include a robust 900W motor, automatic pressure control with auto-start, a maximum output of 97 litres per minute, dry running protection, and a quiet operation design.
| Model Part Number | CBP900 |
|---|---|
| Brand | Clarke International |
The CBP900 has a maximum operating pressure of 3.2 bar and a maximum head of 32 metres.
The pump automatically activates when the water pressure in the system drops below 1.5 bar and will stop once the desired pressure is reached or water flow ceases.
The CBP900 is designed for cold and temperate clean water. It is not recommended for hot water systems as elevated temperatures can affect performance and component lifespan.
Regular visual inspection for leaks, keeping the exterior clean, and checking/cleaning any external filters are recommended. Ensure the pump is protected from freezing.
The CBP900 is a surface pump and is generally suitable for boosting pressure from shallow wells or tanks. It is not designed for deep well applications.
Please refer to the product manual or Clarke International's official website for current warranty information, as terms can vary.
The CBP900 features built-in dry running protection that automatically shuts off the pump if it detects a lack of water, preventing damage.
Check if the power supply is connected and the outlet is functional. Ensure the circuit breaker has not tripped. Verify the auto-start pressure switch is not obstructed.
Ensure the pump is correctly primed. Check for blockages in the inlet or outlet pipework. Clean any external filters. Verify that the maximum head and flow rate are not exceeded by the system's requirements.
This may indicate a leak in the system, a faulty pressure switch, or that the pressure settings are too sensitive for the application. Check all pipe connections for leaks. If the issue persists, contact support.
The pump may not be primed. Try re-priming. Check for air leaks on the suction side. Ensure the suction lift is within the pump's capability.
This could indicate cavitation (air in the system) or wear in the internal components. Ensure the pump is fully primed and check for air leaks. If noise persists, professional inspection may be required.
Setup:
Compatibility:
Care:
