Candy Heat Pump Tumble Dryer - A+

Open the door, locate the lint filter (usually in the door frame), and remove any lint. Clean after each drying cycle for optimal performance.

Open the door and carefully remove the Aquavision water reservoir. Empty the water into a sink or drain.

Make sure you selected the appropriate program for your fabric and not overloaded the machine. Clean the lint filter and condenser. If the problem persists, try a longer drying time.

Select your desired program, then use the timer buttons to set the delay time (up to 24 hours). Press start.

Download the hOn app, create an account or sign in, and follow the in-app instructions to connect your dryer to your home WiFi.

The water reservoir is integrated into the door.

The Woolmark program uses a specific temperature and drum motion to dry wool garments gently, preventing shrinking and damage.

The 'All in One' program allows you to dry different fabric types simultaneously, adjusting the drying parameters accordingly.

Check if the power cord is securely plugged in, the power outlet is working, and the door is properly closed.

Ensure the lint filter is clean, do not overload the dryer, and select the appropriate drying program for the fabric type.

Check for any trapped objects in the drum and consult the user manual for possible causes and solutions.

Consult the user manual for the specific error code and follow the recommended troubleshooting steps. Check the filters and water reservoir.

Make sure your dryer is within range of your WiFi router, and that your home WiFi is working. Restart your router and dryer, and then try reconnecting through the hOn app.