Taps2Traps Traditional Crosshead Tap Conversion Kit - Silver

This pair of traditional replacement tap heads and cartridges from Taps2Traps is designed for easy...

Best current price£19.95from B&Q

One Offer

1 offer from £19.95

View price history by clicking the chart icon.

B&QB&Q - 1/2" Traditional Crosshead Style Tap Conversion Kit By Hot & Cold Pair Inc Cartridges
Free delivery in 1–3 days
£19.95
Visit shop

Product Information

Full details

This Taps2Traps Traditional Crosshead Tap Conversion Kit in Silver is for homeowners looking to update their existing mixer taps with a classic aesthetic. Its key benefit is the easy conversion of current taps into a stylish crosshead design, offering both form and function. A potential caveat is its specific fitment for twin hole deck-mounted mixer taps with 180mm pipe centres.

All features

ColourSilver
Model Part NumberTCHDMT
BrandTaps2Traps

Extended Product Information

FAQs

What is the pipe centre measurement for this kit?

This kit is designed for taps with 180mm pipe centres.

Can I use this kit on any type of tap?

No, this kit is specifically for twin hole, deck-mounted mixer taps with 180mm pipe centres.

Do I need to replace my entire tap system?

No, this is a conversion kit designed to replace your existing tap heads and cartridges, allowing you to update the style without a full replacement.

Is this kit suitable for high-pressure water systems?

Yes, the full turn cartridges are designed to work effectively with both low and high-pressure systems.

What is the connection size for the cartridges?

The cartridges have a standard 1/2" BSP fitment.

How do I clean the silver finish?

Use a soft, damp cloth. Avoid abrasive cleaners to prevent scratching the finish.

What is included in the kit?

The kit includes a pair of traditional crosshead tap heads and their corresponding 1/2" BSP full turn cartridges.

Troubleshooting

Tap is dripping after installation

Ensure the cartridge is fully seated and tightened correctly. Check for any debris in the valve seat. If the issue persists, the cartridge may be faulty.

Low water flow

Verify that the water supply valves are fully open. Check for any kinks in flexible hoses or blockages in the cartridges' internal filters. Ensure the pipe centres match the required 180mm.

Handles are stiff to turn

Ensure the handles are correctly aligned and tightened onto the cartridge spindle. The cartridges may require a brief period of use to fully 'bed in'.

Water is not hot or cold enough

Confirm that the hot and cold water supply lines are correctly connected to the respective inlets of the tap. Ensure both water supplies are adequate.

Pros and Cons

Pros

  • Classic and attractive crosshead design.
  • Full turn cartridges offer precise water control.
  • Compatible with both low and high-pressure systems.
  • Easy installation process for DIY enthusiasts.
  • Durable construction for long-lasting use.

Cons

  • Specific fitment for twin hole, deck-mounted mixer taps with 180mm centres only.
  • Silver colour may not match all bathroom or kitchen decors.
  • Requires basic plumbing knowledge for installation.

Setup, Compatibility & Care Instructions

Setup:

  1. Isolate Water Supply: Turn off the main water supply to your taps.
  2. Remove Old Tap Heads: Carefully unscrew and remove the existing tap heads and cartridges.
  3. Install New Cartridges: Fit the new 1/2" BSP cartridges into the tap body, ensuring a snug seal.
  4. Attach Crosshead Handles: Secure the new crosshead handles onto the cartridge stems.
  5. Test for Leaks: Turn the water supply back on slowly and check for any leaks around the connections.

Compatibility:

  • Designed for twin hole, deck-mounted mixer taps.
  • Requires 180mm pipe centres.
  • Features a 1/2" BSP fitment for the cartridges.

Care:

  • Clean with a soft, damp cloth.
  • Avoid abrasive cleaners or scouring pads, which can scratch the silver finish.
  • Periodically check connections for tightness to prevent leaks.

Price History

DatePrice
Visit shop