Kenable Microphone Lead - Red

The screened construction significantly reduces or eliminates electromagnetic interference (EMI) and radio frequency interference (RFI) from nearby electrical equipment or power sources, resulting in a cleaner and quieter audio signal.

The connectors are described as 'all-metal robust ends', indicating they are constructed from metal for increased durability and reliability compared to plastic connectors.

While this is an XLR cable, it is specifically designed as a microphone cable for audio signals. It may not be suitable for speaker-level outputs, which often require higher gauge wiring and different connector types (like Speakon or TS jacks) depending on the amplifier and speaker specifications.

'Plug and Play' means the cable is ready to use immediately upon connection. No software drivers or complex configuration are required; it simply works by establishing a physical connection between audio devices.

The 3-meter length is standard for many applications, but for very large stages or when a microphone needs to be placed far from the mixing desk, a longer cable might be necessary. It's ideal for close-proximity connections or smaller performance spaces.

Use a dry, lint-free cloth to gently wipe the metal parts of the connector. Avoid using any cleaning liquids or solvents, as these could damage the internal contacts or housings. If there is stubborn dirt, a slightly damp cloth can be used, ensuring it dries completely before use.

Information regarding the specific warranty period is not provided in the product data. Please refer to the retailer or manufacturer's official documentation for warranty details.

Ensure both XLR connectors are fully and securely plugged into the devices. Check that the pin connections are correct (1:1, 2:2, 3:3). Test the cable with different equipment or try a different cable to isolate the issue. Inspect the cable and connectors for visible damage.

This typically indicates interference. Ensure the cable's shielding is intact and not compromised. Verify that the cable is not running parallel and too close to power cables. Try using the cable in a different location or with different equipment to rule out ground loop issues or interference from other devices.

Check the female connector for bent pins or debris. Ensure the locking mechanism on the female XLR connector is properly disengaged before attempting to connect or disconnect. Do not force the connection; if resistance is met, re-align and try again. If the male connector is damaged, it may need replacement.