Best current price£63.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£63.99Visit shop B&Q - 6L 5W30 Fully Synthetic Engine Oil Low Saps Acea C1Stjlr.03.5005
Visit shop2 offers from £63.99
View price history by clicking the chart icon.
The Morris Lubricants Multivis ADT C1 5W-30 is a low-SAPS, fully synthetic engine oil designed for the latest low-emission petrol and diesel engines requiring a low viscosity oil. Its key benefit is protecting sensitive exhaust after-treatment devices like Diesel Particulate Filters (DPFs), ensuring efficient and trouble-free operation. A primary caveat is that it must not be mixed with non-ACEA C1 compliant oils, as this can negatively impact after-treatment systems. This oil enhances engine efficiency, improves fuel economy, offers excellent cold-start performance, and provides superior high-temperature protection.
| Model Part Number | Stjlr.03.5005 |
|---|---|
| Brand | Morris Lubricants |
Low-SAPS refers to low levels of Sulfated Ash, Phosphorus, and Sulfur. This is important for modern engines with exhaust after-treatment systems like Diesel Particulate Filters (DPFs) as it prevents clogging and damage.
Only use this oil if your vehicle manufacturer specifically requires an ACEA C1, SAE 5W-30 lubricant and lists the Ford WSS-M2C934-B or STJLR.03.5005 specifications. Check your owner's manual.
Mixing can degrade the performance of your exhaust after-treatment devices (like DPFs), potentially leading to premature failure and costly repairs. It can also negatively impact engine operational efficiency.
This oil is formulated for the latest low-emission engines. Older engines may require different oil specifications. Always consult your vehicle's owner's manual.
Follow the oil change intervals recommended by your vehicle's manufacturer. These are typically found in your owner's manual and depend on driving conditions and mileage.
ACEA C1 is a lower SAPS specification than C3, meaning it has even less ash content, making it ideal for the most sensitive after-treatment devices. Always use the specific category your manufacturer recommends.
Ensure only ACEA C1 compliant oil has been used. If non-compliant oil was mixed, it may require a system flush and oil change with the correct ACEA C1 oil.
Verify the oil level is correct. While this oil has low volatility, excessive consumption might indicate other engine issues. Check for leaks or internal engine problems.
Ensure the correct oil viscosity (5W-30) and specification (ACEA C1) are used. Check oil level. If noise persists, consult a mechanic as it might indicate component wear.
Compatibility: This oil is specifically recommended for the latest low-emission passenger car high-performance petrol and diesel engines that require ACEA C1 SAE 5W-30 lubricants. Ensure your vehicle manufacturer specifically lists ACEA C1 and the Ford WSS-M2C934-B or STJLR.03.5005 specifications. It is *crucial* not to mix this oil with any oil that is not ACEA C1 compliant. Doing so will adversely affect after-treatment devices and engine operational efficiency.
Setup: Engine oil should be changed according to the vehicle manufacturer's service schedule. Always ensure you are using the correct grade and specification. Refer to your vehicle's owner's manual for the correct oil capacity.
Care: Store the oil in a cool, dry place, away from direct sunlight. Keep the container tightly sealed when not in use. Dispose of used oil responsibly at an authorized recycling center.
