Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Hycote Spray Paint Double Acrylic Hyundai Electric Red 150ml + Red Primer Kit
Visit shop3 offers from £11.19 - £12.99
View price history by clicking the chart icon.
The Hycote Double Acrylic Hyundai Electric Red Spray Paint and Primer Kit is a professional-grade automotive refinishing solution designed for vehicle owners and enthusiasts looking to perform high-quality touch-ups or small repairs on Hyundai vehicles. The primary benefit of this kit is its advanced compressed aerosol technology, which allows two 150ml cans to deliver the same coverage as conventional 300ml aerosols while ensuring a smooth, drip-free application. However, users should note that as an acrylic-based product, success depends heavily on proper surface preparation and environmental conditions during application.
| Colour | Red |
|---|---|
| Model Part Number | HYCPPGKIT58 |
| Brand | Motor World |
| Container Volume | 150ml |
No, this is specifically formulated for Hyundai Electric Red. Check your vehicle's paint code against the product description before purchase.
While the acrylic formula is durable, applying an automotive-grade clear coat can provide additional gloss and protection against environmental contaminants.
Yes, but you must ensure the surface is clean and use a plastic adhesion promoter if the bumper is unpainted or bare plastic.
Due to the fast-drying formula, 10-15 minutes is typically sufficient between coats, depending on ambient temperature.
Yes, this kit is compatible with most existing acrylic and cellulosic paint systems used in automotive repair.
Invert the can and press the nozzle for two seconds to clear the internal feed tube.
You are likely holding the can too close or applying the coat too heavily. Maintain a distance of 20-30cm and use lighter, faster passes.
Ensure the surface is properly primed and sanded. If applying in high humidity, the paint may 'blush'; move to a drier, climate-controlled area.
Before starting, ensure the target area is thoroughly cleaned, degreased, and sanded to remove any rust or loose paint. If the surface is clean and smooth, the paint will adhere perfectly to existing OEM finishes. Always mask off surrounding areas with professional-grade painter's tape to prevent overspray. After use, invert the can and spray for a few seconds to clear the nozzle; this prevents clogging for future use. Store in a cool, dry place away from extreme heat to maintain the integrity of the propellant.
