Webb MC26 4-in-1 Petrol Multi Cutter - 26cc

Use a fuel-oil mixture specifically designed for two-stroke engines. The correct ratio should be detailed in your user manual.

Prime the engine by pressing the primer bulb. Set the choke, then pull the starter cord firmly until the engine starts.

Clean the air filter after every few uses or more frequently in dusty conditions. Refer to your manual for specific instructions.

Always wear safety glasses, gloves, and sturdy footwear. Avoid operating the machine in wet conditions, and keep bystanders at a safe distance.

The Webb MC26 comes with a standard warranty. Please refer to your purchase documentation or contact Webb customer support for details.

Clean the machine, drain the fuel, and store it in a dry, well-ventilated area away from direct sunlight and extreme temperatures.

Replacement parts can be found through Webb's authorized dealers or online retailers. Make sure to use genuine Webb parts.

Check the fuel tank for fuel, ensure the choke is correctly set, and check the spark plug for proper function. Make sure the on/off switch is in the 'on' position.

Check the drive shaft connection. Ensure the cutting head is properly attached and not obstructed.

Sharpen or replace the cutting blade or trimmer line. Ensure the cutting head is not clogged.

Check for loose parts, and tighten if necessary. Ensure the cutting head is balanced and the engine mounts are secure.