SecureFix Direct Double Wood Block With Shackle - 1.1 Ton - 6 Inch

Currently unavailable

Currently unavailable
This SecureFix Direct Double Wood Block with Shackle is designed for professionals and individuals involved in lifting and towing applications, offering a robust solution for managing wire ropes up to 19mm in diameter. Its key benefit is reliable load management with a safe working load of 1.1 Ton, complemented by a corrosion-resistant galvanised finish and a traditional varnished wood shell. A potential caveat is that it requires proper understanding of load limits and wire rope compatibility to ensure safe operation.
| Brand | SecureFix Direct |
|---|
This block is designed to suit wire ropes with a diameter of 19mm.
The Safe Working Load for this SecureFix Direct Double Wood Block is 1.1 Ton.
Yes, a test certificate is included with the block.
Yes, the test certificate can be sent via email upon request.
Clean the wood shell with a slightly damp cloth. Avoid soaking the wood or using harsh cleaning chemicals.
The galvanised finish provides corrosion resistance but can wear over time with heavy use or exposure to abrasive conditions. Regular inspection is recommended.
A becket is a built-in loop or eye on the block, used as an additional attachment point for further rigging or securing lines.
Check for debris in the sheave groove. Lubricate the sheave axle if stiffness is present.
This is normal surface oxidation on galvanised steel. Clean with a wire brush if necessary and apply a rust inhibitor. Heavy pitting may indicate reduced strength.
Minor surface cracks may be cosmetic. If deep cracks appear, cease use and inspect for structural integrity. Consider replacing the block if compromised.
Ensure the wire rope is correctly seated and not rubbing against the sides of the groove. Check if the sheave is rotating freely.
Setup:
Compatibility:
Care: