Heat Resistant Paint - Ultramarine Blue - 250ML
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to protect and beautify metal surfaces on their vehicles or appliances with Xtremeauto Heat Resistant Paint. The key benefit is its ability to withstand high temperatures and resist various damaging elements, ensuring long-lasting protection and a professional gloss finish. However, it's important to note that this paint is not suitable for application on aluminium surfaces.
All features
| Model Part Number | WLW1-PAINTSHOP-7610-250-5022 |
|---|---|
| Brand | XtremeAuto |
Extended Product Information
FAQs
What surfaces can I apply this paint to?
This paint is suitable for bare metal, alloy, steel, manifolds, exhausts, engine bays & blocks, head rocker covers, brake calipers, hubs, drums, discs, wheels, electric stoves, hot surfaces, hoses, pipes, and BBQ stands.
Do I need a primer?
No, you generally do not need a primer. The paint can be applied directly to metal surfaces. However, it is not suitable for aluminium.
Can I use this paint on my car's engine?
Yes, it is suitable for various engine parts, including engine heads and rocker covers, due to its high heat resistance.
How do I apply the paint?
You can apply it by brush or spray gun. If using a spray gun, thin the paint with up to 5-10% cellulose thinners.
How long does it take for the paint to dry?
The paint is fast-drying. Allow approximately 10 minutes between coats when spraying.
Is this paint resistant to petrol and oil?
Yes, the paint is resistant to oil, petrol, diesel, and stone chips.
What is the gloss level of the paint?
It provides a high-gloss finish.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is thoroughly cleaned and free of any contaminants. Lightly sand the surface to improve adhesion. If needed, apply a thin coat and let it dry before applying a thicker coat.
Paint finish is not smooth.
Ensure paint is properly stirred. Apply thin, even coats, and avoid over-spraying or over-brushing. If spraying, use the recommended thinning ratio.
Paint is peeling or blistering.
The surface was not properly prepared. Remove the damaged paint, clean the surface thoroughly, and reapply the paint, following the preparation and application instructions.
Color is not as expected.
Ensure you are using the correct color. If you are mixing, ensure that you have the correct ratios. If sprayed, consider that the finish may vary depending on the environment.
Pros and Cons
Pros
- High heat resistance up to 180°C.
- Fast-drying formula saves time.
- Can be applied directly to metal surfaces, simplifying the process.
- Provides excellent color coverage and a glossy finish.
- Resistant to a wide range of damaging elements.
- Versatile use on various components.
Cons
- Not suitable for use on aluminium surfaces.
- Requires thorough surface preparation for optimal results.
- Thinning is needed when using a spray gun.
- May require multiple coats for desired finish.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from dirt, oil, grease, rust, or existing loose paint.
- Stir Well: Thoroughly stir the paint before application to ensure even distribution of pigments.
- Application Method: Apply by brush or spray gun.
- Thinning (If Using Spray Gun): Thin with up to 5%-10% cellulose thinners, if required.
- Coats: When spraying, allow 10 minutes between coats.
Compatibility
This paint is compatible with:
- Bare metal
- Alloy and steel
- Manifolds and exhausts
- Engine bays and blocks
- Head rocker covers
- Brake calipers, hubs, drums, and discs
- Wheels
- Electric stoves and hot surfaces
- Hoses and pipes
- BBQ stands
Care
- Clean with mild soap and water.
- Avoid abrasive cleaners or solvents.
- Inspect regularly for damage and reapply as needed.