Part of the SV20 Series offering a one battery fits all solution, keeping costs down without compr...Part of the SV20 Series offering a one battery fits all solution, keeping costs down without compromising on performance. Ready to use in 3 minutes. Cordless operation allows use anywhere in the workshop. Composite housing with soft grip for added comfort. Suitable for glue stick between Ø10-12mm. On/off switch and trigger feed control. Supplied with mains charger, 2Ah battery and a canvas storage bag.
This Sealey 20V Cordless Glue Gun Kit is designed for DIY enthusiasts and professionals needing a versatile, portable adhesive solution. Its key benefit is cordless operation, allowing for use anywhere without power outlets, while a minor caveat is the need for compatible SV20 Series batteries. The kit provides a convenient way to apply adhesives quickly and efficiently for various repair and crafting tasks.
All features
Model Part Number
CP20VGGKIT1
Brand
Sealey
Extended Product Information
FAQs
What size glue sticks does this gun use?
This Sealey cordless glue gun is designed for glue sticks with a diameter of Ø10-12mm.
How long does the battery last?
The included 2Ah battery provides a typical usage time, but actual duration depends on factors like trigger use and ambient temperature. For extended use, consider additional SV20 Series batteries.
Can I use glue sticks from other brands?
It is recommended to use Ø10-12mm glue sticks that meet quality standards. Using non-standard or poor-quality sticks may affect performance and potentially damage the gun.
How long does it take to heat up?
The glue gun is ready for use in approximately 3 minutes after being switched on.
Is this compatible with other Sealey battery platforms?
No, this glue gun is specifically designed for the Sealey SV20 Series 20V battery system. It is not compatible with other Sealey battery voltages or series.
What is included in the kit?
The kit includes the 20V cordless glue gun, a 2Ah battery, a mains charger, and a canvas storage bag.
Can I use the glue gun while it's charging?
No, the glue gun is designed for cordless operation. The battery should be charged separately using the supplied mains charger and then inserted into the tool for use.
Troubleshooting
Glue gun not heating up
Ensure the battery is correctly inserted and charged. Check that the On/Off switch is in the 'On' position. Verify the glue stick is properly inserted.
No glue dispensing
Check if the glue gun has reached its operating temperature (allow 3 minutes). Ensure the trigger is being squeezed firmly. Verify the glue stick is not fully depleted or jammed.
Glue leaking when not in use
Turn the glue gun off and disconnect the battery when not actively dispensing. Allow the gun to cool. Ensure the trigger is fully released.
Poor bond strength
Ensure surfaces are clean and dry. Allow sufficient time for the glue to set. Use the correct type of glue stick for the materials being bonded.
Battery not charging
Ensure the charger is plugged into a working power outlet. Check that the battery is correctly seated in the charger. Clean the battery and charger contacts if dirty.
Pros and Cons
Pros
Completely cordless for maximum portability.
Heats up quickly, saving time on projects.
Provides good control over glue application.
Comfortable to hold and use for longer periods.
Part of a larger battery system, reducing overall cost if other SV20 tools are owned.
Cons
Requires a compatible Sealey SV20 Series battery and charger (though included in kit).
Battery life may be a limiting factor for very large or continuous jobs.
Adhesive type and melting point are dependent on the glue sticks used.
Cordless design might be overkill for users with readily available power sources.
Setup, Compatibility & Care
Setup:
Ensure the 2Ah battery is fully charged using the supplied mains charger. Refer to the charger's manual for specific charging times and indicators.
Insert a Ø10-12mm glue stick into the rear of the gun.
Connect the charged battery to the base of the glue gun.
Turn the glue gun on using the On/Off switch.
Allow approximately 3 minutes for the glue gun to reach its operating temperature.
Squeeze the trigger gently to dispense the melted glue.
Compatibility:
This glue gun is part of the Sealey SV20 Series. It requires a Sealey 20V SV20 Series battery (2Ah included) for cordless operation.
It is designed for use with Ø10-12mm diameter glue sticks.
Care:
Always turn the glue gun off and disconnect the battery when not in use or when changing glue sticks.
Allow the glue gun to cool completely before cleaning or storing.
Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
Store the glue gun, battery, charger, and canvas bag in a dry, clean environment.