Liberty Doors Oak Internal Unfinished Farley Door - Brown - IOFAR30

"Unfinished" means the door is supplied in its raw oak state, without any paint, stain, or varnish applied. This allows you to completely customize its final appearance by applying your preferred finish, such as paint, stain, or clear lacquer, to match your interior design.

Yes, it is crucial to apply a suitable finish (paint, stain, or varnish) to all surfaces of the door, including the top and bottom edges, before installation. This protects the wood from moisture, helps prevent warping, and ensures its longevity.

The type of finish depends on your desired look and level of protection. For a natural wood appearance, use a clear varnish or wood stain. For a painted look, use a wood primer followed by interior wood paint. Always choose products suitable for internal doors and follow the manufacturer's application instructions.

Installing an unfinished door involves the additional step of applying a finish. Otherwise, the installation process is similar to any internal door, requiring the fitting of hinges, handles, and proper alignment within the door frame. If you're not experienced, professional installation is recommended.

No, the Liberty Doors Oak Internal Unfinished Farley Door is supplied as a slab only. Hardware such as hinges, handles, and latches must be purchased separately, allowing you to choose components that best match your style and needs.

The lifetime guarantee covers manufacturing defects and structural integrity under normal use, provided the door has been properly finished, installed, and maintained according to guidelines. It typically does not cover damage from misuse, improper finishing, or normal wear and tear. Refer to the specific warranty terms for full details.

While minor trimming might be possible, significant alterations are generally not recommended as they can compromise the door's structure and warranty. It's best to order a door that closely matches your opening size. Liberty Doors also offers bespoke custom-size options to ensure a perfect fit without on-site trimming.

Once finished, clean the door with a soft, damp cloth and a mild, non-abrasive cleaner if necessary. Avoid harsh chemicals, as these can damage the finish. Regularly wipe away dust to maintain its appearance.

Ensure the door surface was thoroughly cleaned and free of dust or oils before application. Use a high-quality primer if recommended for your chosen finish. Apply thinner coats and allow adequate drying time between coats. Sand lightly between coats for a smoother result.

This can often be due to improper acclimatization or uneven finishing. Ensure the door was allowed to acclimatize for at least 48 hours before finishing and that all six sides (front, back, and all four edges) were finished evenly to prevent moisture imbalance. If minor, adjust hinges; for significant warping, contact customer support under the lifetime guarantee.

Check hinge alignment and adjust if necessary. If the door has expanded slightly, a small amount of planing might be required on the sticking edge. Ensure the door was properly sized for the opening, considering any finish thickness.

Tighten screws on hinges and handles. If screw holes are stripped, use larger screws or fill the holes with wood filler and redrill pilot holes.