VEVOR Cargo Bar - 2260-2642 mm - 4 pcs

The VEVOR ratchet cargo bar offers exceptional versatility with an adjustable range from 2260 mm t...

Best current price£90.90from Vevor UK

One Offer

1 offer from £90.90

View price history by clicking the chart icon.

Vevor UKVEVOR Cargo Bar, Ratcheting Cargo Bar Adjustable from 89" to 104", Heavy-duty Steel Cargo Stabilizer Bar with 309 lbs Capacity, Truck Bed Load Bar for Truck Bed, Trailer, Semi Trailer (4 pcs)
Free delivery in 1–3 days
£90.90
Visit shop

Product Information

Full details

The VEVOR Cargo Bar set is designed for professional truck drivers, logistics managers, and anyone who needs to secure heavy or shifting loads in trailers and semi-trailers. This four-piece kit provides a robust, adjustable solution for keeping cargo stable during transit, though users should note that the bars require manual tensioning and are intended for interior use within the specified length range of 2260 mm to 2642 mm.

All features

BrandVEVOR

Extended Product Information

FAQs

Can I use these bars horizontally and vertically?

Yes, they are designed to provide stabilization in both horizontal and vertical orientations provided the walls can support the tension.

Does the set come with four bars?

Yes, each purchase includes a set of 4 cargo bars.

Is the rubber pad replaceable?

The pads are integrated into the end caps for maximum stability; they should be kept clean to maintain performance.

What is the maximum load capacity per bar?

Each individual bar has a load capacity of 140 kg.

Will these bars damage my trailer walls?

The thickened, striped rubber pads are designed to distribute pressure and protect wall surfaces, but avoid overtightening beyond the necessary tension.

Do these bars require any drilling?

No, these are tension-mounted and require no drilling or permanent installation hardware.

Troubleshooting

The bar slips out of place after installation

Ensure the trailer walls are clean and free of oil. Re-tighten the ratchet to ensure higher pressure is applied to the rubber pads.

Ratchet mechanism is stiff or difficult to turn

Clear any dirt or debris from the gear teeth and apply a light lubricant to the pivot points.

Bar length is too short for the trailer

Verify that your trailer width does not exceed 2642 mm. If it does, this specific model is not compatible.

Pros and Cons

Pros

  • Tool-free installation saves time during loading operations
  • High-hardness carbon steel offers superior durability compared to standard bars
  • Galvanized finish protects against environmental wear and oxidation
  • Thickened rubber foot pads prevent damage to trailer walls while maintaining traction
  • Pack of four provides comprehensive cargo management for larger loads

Cons

  • Specific length range may not fit vehicles outside the 2260 mm to 2642 mm scope
  • Requires manual check to ensure proper tension is maintained over long distances
  • Heavier than aluminum alternatives due to the solid steel construction

Setup, Compatibility & Care

Setup

  1. Measure the internal width of your truck or trailer to ensure it falls within the 2260-2642 mm range.
  2. Release the ratchet locking mechanism and extend the bar to the approximate width of the trailer.
  3. Position the bar against the cargo.
  4. Tighten the ratchet handle until the rubber pads are firmly pressed against the trailer walls.
  5. Verify that the bar is level and the pads are sitting flush against the vertical surfaces.

Compatibility

These bars are designed primarily for trailers, semi-trailers, and trucks with reinforced interior side walls capable of withstanding the lateral pressure exerted by the bars.

Care

  • Regularly inspect the rubber pads for debris or heavy wear; clean them with a damp cloth to restore grip.
  • Keep the ratchet assembly clear of road grime and debris.
  • Periodically inspect the galvanized coating for scratches and touch up with rust-inhibiting spray if necessary.

Price History

DatePrice
Visit shop