V33 Protective Clear Soft Sheen Worktop Oil - 500Ml
Best current price£18.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£18.00Visit shop B&Q - Protective Clear Soft Sheen Worktop Oil500Ml
Visit shopB&Q£18.00Visit shop One Offer
1 offer from £18.00
View price history by clicking the chart icon.
Product Information
Full details
The V33 Protective Clear Soft Sheen Worktop Oil is designed for individuals seeking to protect frequently used wooden surfaces, such as worktops and tables, from daily wear and tear. Its key benefit is providing durable protection suitable for all wood types, including both European and exotic species, on bare or previously oiled finishes. A potential consideration is its specific formulation for oiled surfaces, requiring proper preparation for bare wood.
All features
| Brand | V33 |
|---|
Extended Product Information
FAQs
Can I use this oil on a previously varnished worktop?
No, this oil is not suitable for varnished surfaces. The varnish must be completely removed by sanding before you can apply the V33 Clear Soft Sheen Worktop Oil.
How often should I re-oil my worktop?
The frequency depends on usage. For heavily used surfaces like kitchen worktops, re-oiling may be needed every 6-12 months, or whenever the wood begins to look dry or absorb water.
Is this product suitable for outdoor wooden furniture?
This product is specifically designed for indoor furniture use. It may not provide adequate protection against prolonged exposure to outdoor elements like UV rays and moisture.
How do I clean up spills on an oiled surface?
Wipe up spills immediately with a soft, damp cloth. Avoid using harsh detergents or abrasive cleaners, as these can damage the oiled finish.
What is the drying time before I can use the surface?
The surface should be dry to the touch within a few hours, but it requires at least 24 hours to dry completely before normal use. Full curing can take several days.
Can I apply this oil on exotic woods like Iroko?
Yes, this oil is suitable for all wood species, including European and exotic woods.
Does this oil change the color of the wood?
The oil is clear and designed to enhance the natural color and grain of the wood, providing a soft sheen without significantly altering the original tone.
Troubleshooting
Uneven finish or patches after drying
This usually indicates excess oil was not wiped off properly after application. Lightly sand the affected areas and reapply a thin, even coat, ensuring all excess is wiped away after the recommended penetration time.
Wood surface still absorbs water or stains easily
The oil may not have been applied thickly enough, or not enough coats were used. Ensure the surface is fully saturated during application and that sufficient drying and curing time has passed. Reapply another coat if necessary.
Sticky or tacky surface after application
Too much oil was applied and not wiped off, or the surface was not properly prepared. Ensure all excess oil is removed and allow adequate drying time. If it remains tacky, you may need to lightly sand and reapply.
White spots or rings appearing on the surface
These are typically water marks. The oil needs to be reapplied to restore protection. Clean the area, let it dry completely, and apply a fresh coat of oil, wiping off any excess.
Pros and Cons
Pros
- Protects daily-use furniture effectively.
- Works on a wide range of wood types.
- Suitable for both new and re-oiling projects.
- Provides a natural, soft sheen finish.
- Easy to apply on various wooden surfaces.
Cons
- Requires proper surface preparation for bare wood.
- Primarily designed for oiled surfaces, may require stripping if previously varnished.
- Not suitable for non-wood materials.
Setup, Compatibility & Care
Setup & Application:
- Surface Preparation: Ensure the wood surface is clean, dry, and free from dust and grease. For bare wood, sand lightly with fine-grit sandpaper (e.g., 120-180 grit) and remove dust. For previously oiled surfaces, ensure they are clean and dry; light sanding may be needed if the old oil is damaged.
- Application: Apply the oil generously in thin, even coats using a brush, roller, or lint-free cloth. Work in the direction of the wood grain.
- Drying: Allow the first coat to penetrate for approximately 15-30 minutes. Wipe off any excess oil that has not penetrated the wood with a clean cloth.
- Second Coat: Apply a second coat following the same procedure. For heavily used surfaces, a third coat may be beneficial after the second coat has dried.
- Drying Time: Allow at least 24 hours for the surface to dry thoroughly before use, and several days for the finish to fully cure.
Compatibility:
- Suitable for all wood species (European and exotic).
- Recommended for bare or previously oiled wood surfaces.
- Not recommended for varnished or painted surfaces. If applying over old varnish, it must be completely removed.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners or excessive water.
- For minor scratches or wear, reapply a thin coat of oil after cleaning and drying the area.
- Regular maintenance (re-oiling as needed, typically annually or when the surface starts to look dry) will ensure continued protection.