Best current price£18.99from Creality
Shopping.co.uk recommended and popular offers
Creality£18.99Visit shop Creality Uk Unisex Red Hyper Petg 1.75Mm 3D Printing Filament 1Kg
Visit shop14 offers from £18.99 - £21.98
View price history by clicking the chart icon.
Creality Hyper PETG is engineered for users who require high-speed printing capabilities without compromising the structural integrity or detail of their 3D models. This filament is ideal for functional engineering parts that demand toughness and environmental resistance, though it requires precise temperature management typical of all PETG materials to avoid stringing.
| Model Part Number | 3301030071 |
|---|---|
| Brand | Creality |
Yes, it is a standard 1.75mm PETG filament compatible with the vast majority of FDM 3D printers on the market.
This filament is optimized for speeds up to 300mm/s, though results may vary based on your specific printer's capabilities.
No, it works in both open-frame and enclosed 3D printers, though enclosures can help maintain consistent temperatures.
Keep it in a sealed bag with desiccant packets to prevent moisture absorption, which can cause print defects.
While PETG is often considered food-safe, the additives in colored filaments and the nature of the 3D printing process (porosity between layers) generally make it unsuitable for food contact.
Increase retraction speed or distance in your slicer settings, and ensure the filament is dry.
Verify that your build plate is cleaned with isopropyl alcohol and that the first layer height is properly calibrated.
Check your nozzle temperature; you may need to increase it slightly to compensate for the faster melt flow rate.
To achieve the best results with 1.75mm Hyper PETG, store the filament in a cool, dry place and use a dry box if possible, as PETG is hygroscopic and can absorb moisture from the air. Ensure your printer's build plate is properly leveled and clean, as PETG has excellent adhesion properties that can sometimes lead to overly permanent bonds with certain surfaces. For nozzle temperatures, begin within the standard PETG range (typically 230°C–255°C) and adjust your cooling fan speed based on the intricacy of your model—higher speeds for sharp details, lower speeds for maximum structural integrity.
