Eastwood Aluma Blast Paint - Silver - 355ml
Best current price£40.07from Demon Tweeks
Best offers
Shopping.co.uk recommended and popular offers
Demon Tweeks£40.07Visit shop Eastwood Aluma Blast Aluminium Look Paint - Aluminium, Silver
Visit shopDemon Tweeks£40.07Visit shop All Offers
2 offers from £40.07
View price history by clicking the chart icon.
Demon TweeksEastwood Aluma Blast Aluminium Look Paint - Aluminium, Silver
£7.94 delivery
£40.07
Visit shop
eBayEastwood Aluma Blast Cast Aluminium Look Car/Van Water Pump/Gearbox Paint
Free delivery in 1–3 days
£40.07
Visit shop
Product Information
Full details
The Eastwood Aluma Blast Paint is designed for automotive restorers and DIY enthusiasts looking to return tarnished, cast aluminium parts to their original factory appearance. It offers a durable, satin finish that protects surfaces from heat and oxidation, making it an essential tool for engine bay detailing. However, users should note that the coverage is limited to approximately 0.56 square metres per can, meaning multiple cans may be required for larger engine components.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 10109Z |
| Brand | Eastwood |
| Container Volume | 355ml |
Extended Product Information
FAQs
Can this paint be used on exhaust manifolds?
No, this paint is rated for 148 degrees Celsius, while exhaust manifolds routinely exceed these temperatures.
How much area does one 355ml can cover?
One can covers approximately 0.56 square metres.
Do I need a primer before using Aluma Blast?
While it can be applied directly to clean, bare cast aluminium, ensure the surface is properly prepped and free of contaminants for the best bond.
Is the finish matte or glossy?
It is a satin finish with a very low 4-15% gloss level.
How long does it take to dry?
Drying times vary by temperature and humidity; check the label for touch-dry and full-cure specifications.
Troubleshooting
Paint is bubbling or peeling shortly after application.
This is usually caused by inadequate surface preparation or residual oil. Strip the paint and ensure the surface is completely degreased and dry.
Finish appears uneven or blotchy.
Ensure the can is shaken thoroughly and that you are using light, overlapping coats rather than one heavy, wet coat.
Paint nozzle is clogged.
Invert the can and spray for a few seconds after each use to clear the nozzle, or soak the nozzle in lacquer thinner to remove buildup.
Pros and Cons
Pros
- Replicates the authentic look of new cast aluminium
- Easy aerosol application process
- Withstands moderate engine heat
- Provides a protective barrier against oxidation
Cons
- Limited coverage area per can
- Requires thorough surface preparation for best results
- Specific low-gloss finish may not match all aluminium alloys
Setup, Compatibility & Care
To ensure proper adhesion, remove all loose oxidation and contaminants using a wire brush or degreaser before painting. Shake the aerosol can vigorously for at least one minute before use to ensure the pigment is properly mixed. Hold the can 20 to 30 centimetres from the surface while spraying in a sweeping motion. Once dry, the paint creates a resilient, long-lasting barrier. For maintenance, simply wipe down the treated parts with a soft cloth. Avoid using harsh solvents or high-pressure washers directly on the painted surface to maintain the integrity of the finish.