Diall Simplex Zinc-Plated Steel Wire Rope Clamp - Silver

Simplex wire rope clips are primarily used for general-purpose applications such as forming eye loops, securing wire rope ends, and creating temporary fastenings.

No, these clamps are designed for general use and are not rated for heavy-duty or safety-critical lifting operations where failure could cause injury or damage.

The number of clamps required depends on the wire rope diameter and the load it will bear. For most general applications, two or three clamps are typically recommended, installed with correct spacing and torque.

Zinc-plated means a layer of zinc has been applied to the steel to provide a barrier against corrosion and rust, improving its durability in outdoor or moist conditions.

Ensure the saddle of the clamp rests on the live end of the rope and the U-bolt on the dead end. Tighten the nuts evenly and progressively to the recommended torque value for the specific wire rope size.

It is generally recommended to replace wire rope clamps after they have been subjected to a load, removed, and reinstalled, as the clamping process can deform the rope and the clamp, compromising its holding power.

Ensure nuts are tightened to the correct torque specification. Check that the clamp size is appropriate for the wire rope diameter and that the rope is not damaged.

Check for cross-threading or debris in the threads. Ensure the clamp is correctly seated on the wire rope.

While the zinc plating offers protection, significant corrosion indicates the clamp may be compromised. Replace the clamp if rust is deep or affects structural integrity. Clean off light surface rust with a wire brush and consider applying a protective coating if the clamp is still functional.