Liberon Special Pale French Polish - 1 litre

This Special Pale French Polish is ideal for lighter colored woods such as maple, birch, ash, and also for preserving the colors in marquetry and inlay work.

It's generally best applied to bare wood. If applying over an existing finish, ensure it is fully removed or very well-keyed, and test in an inconspicuous area first, as compatibility can vary.

Drying time varies with temperature and humidity, but generally, allow at least 15-30 minutes between very thin coats. Full hardening can take several days.

This is a 'Special Pale' version, meaning it is colorless and de-waxed. Darker French polishes contain darker shellac and may impart a warmer or amber tone to the wood, which is not desired for light woods or marquetry.

Yes, French polishing is renowned for its ability to produce a very high gloss, mirror-like finish. This requires patience and the application of many thin, well-executed coats.

French polish provides a good degree of protection but is not fully waterproof. Avoid prolonged contact with water or harsh cleaning agents.

Clean your mop or rubber immediately after use with denatured alcohol to dissolve the shellac and prevent it from hardening.

Ensure application is even and consistent. Build up thin layers rather than applying thick coats. Check if the application tool (mop or rubber) is too dry or too wet.

This can be due to humidity or applying coats too thickly. Allow more drying time between coats, ensure good ventilation, and apply thinner layers.

This often indicates the polish is drying too quickly or the application is too heavy. Try applying more lubricant (e.g., a drop of boiled linseed oil in the rubber) or reduce the pressure and speed of application.

This is typically caused by moisture trapped in the finish. Avoid application in humid conditions and ensure adequate drying time. It may require sanding back and re-applying.