Best current price£2.06from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£2.06Visit shop Hammond 1551GFLBK ABS Miniature Flanged Enclosure Black 50 x 35 x 20mm
Visit shop23 offers from £2.06 - £3.74
View price history by clicking the chart icon.
The Hammond 1551 Series Grey ABS Enclosure is designed for hobbyists and professionals needing a durable, compact housing for small electronic circuits. Its key benefit is IP54 protection against dust and splashing water, ensuring circuit integrity in varied environments. A minor caveat is its small size, which may limit the complexity of PCBs it can accommodate. This enclosure features a flanged lid for easy mounting and is constructed from robust ABS plastic.
| Model Part Number | 1551HFLGY |
|---|---|
| Brand | Hammond |
The IP54 rating indicates that the enclosure offers protection against dust ingress (limited protection, not complete dust-tightness) and protection against splashing water from any direction.
Typically, the enclosure is supplied with the base, the lid, and color-matched screws for securing the lid. Please check the product packaging for exact contents.
Yes, you can drill holes for cable entry or mounting, but doing so may compromise the IP54 rating. Ensure any modifications are sealed appropriately if water or dust protection is critical.
The external dimensions are 60 x 35 x 20mm. The internal usable space is slightly smaller due to the enclosure walls and the internal PCB standoffs. A rough internal dimension is approximately 56 x 31 x 17mm, but this can vary slightly.
The enclosure is supplied with color-matched screws. The thread size is typically M2.5, suitable for the pre-drilled holes in the lid and base.
While it offers IP54 protection, it is primarily designed for indoor or sheltered outdoor use. Prolonged direct exposure to harsh weather conditions (heavy rain, UV radiation) may degrade the ABS plastic over time. Consider additional protective measures if used in extreme outdoor environments.
Yes, ABS plastic can be painted. However, ensure the surface is properly cleaned and primed for optimal adhesion. Painting may affect the satin texture finish.
Check for any internal components or wires obstructing the lid. Ensure the PCB is correctly seated on the standoffs and not protruding too high. Verify the lid is aligned correctly before attempting to secure it.
Ensure you are using appropriate screws for the mounting surface and the flange holes. For wall or shelf mounting, use screws suitable for the material (wood, drywall, metal). For suspension, use a secure tie-wrap through the flange holes.
Minor scratches on the satin texture finish may be difficult to remove completely. For light scratches, try gently buffing with a soft cloth. Avoid using abrasive cleaning materials.
Setup:
Compatibility:
This enclosure is designed to house small PCBs and electronic components. It is compatible with most standard prototyping boards and low-profile components. Ensure your components do not exceed the internal dimensions or interfere with the lid closure.
Care:
Clean the exterior of the enclosure with a soft, damp cloth. Avoid using harsh solvents or abrasive cleaners, as these can damage the ABS plastic. For deeper cleaning, a mild soap and water solution can be used, followed by thorough drying. Ensure the enclosure is completely dry before re-installing electronics.
