DeWalt Brad Point Wood Drill Bit Set - 5 Piece - DT4535-QZ

These drill bits are designed for use with plywood, natural hardwoods, and softwoods.

No, these drill bits are designed for use with wood only. Using them on metal will damage the bits.

The brad point is used to center the drill bit and prevent it from wandering, ensuring accurate hole placement.

Clean the bits with a soft cloth after use. Apply a light coat of oil to prevent rust if storing for an extended period.

Drilling speed should be adjusted based on the wood type. Softer woods require a faster speed, while harder woods require a slower speed to prevent burning or damaging the bit.

The set includes 4mm, 5mm, 6mm, 8mm, and 10mm bits.

Store the drill bits in the provided box or a suitable storage case to protect them from damage and moisture.

Ensure the brad point is centered on the drilling location and apply gentle pressure to allow it to self-center. Check that the drill is perpendicular to the wood surface.

Reduce the drill speed and ensure the bit is sharp. Support the wood from the back to minimize tear-out, especially when drilling through-holes.

Back the drill bit out periodically to clear wood shavings. Ensure you are not forcing the drill bit, and adjust the drill speed as needed. Using a wax stick can help with lubrication.