Tacwise Type 500 Angled Nails - 50mm - 18 Gauge - Galvanised

These nails are designed to work with the Tacwise 500EL electric nailer and the APS ALPHA PNEUMATIC SUPPLIES AceK 18G Angled Brad Nailer.

These nails are 18-gauge.

These nails are 50mm in length.

The galvanised steel provides some corrosion resistance, making them suitable for some outdoor applications, but prolonged exposure to the elements may still cause some degradation. Consider using nails specifically designed for exterior use for optimal results.

The nails are packaged in strips of 100.

These nails are angled at 26 degrees.

Refer to your nailer's manual for specific instructions on clearing jams. Usually, there's a release mechanism or access point to remove the jammed nails.

These nails are available at most hardware stores, as well as online retailers.

Check the nailer's power supply (if electric) or air pressure (if pneumatic). Ensure the magazine is loaded correctly. Inspect the nailer for jams.

Adjust the nailer's depth setting. Increase the air pressure if using a pneumatic nailer.

Use only compatible nails. Clean the nailer's firing mechanism. Check for any obstructions.

Ensure the nailer is perpendicular to the work surface. Reduce the firing depth setting. Try a slower firing rate if possible.