Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Exact Match Fast Drying Aerosol Spray Paint BMW Sparkling Graphite 300ml
Visit shop4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
This Autotek Exact Match Aerosol Spray Paint in Sparkling Graphite is designed for automotive enthusiasts and DIYers seeking a precise color match for BMW vehicles. Its key benefit is the fast-drying, durable finish with protective properties for metal, glass fibre, and rigid plastic surfaces. A potential caveat is the need for application in well-ventilated areas or outdoors at specific temperatures.
| Colour | Grey |
|---|---|
| Model Part Number | MC108300 |
| Brand | Autotek |
| Container Volume | 300ml |
This paint is compatible with BMW 1 Series, 3 Series, M3 & X6 models from 2007 onwards, using Manufacturer Paint Code A22, WA22 for Sparkling Graphite.
Yes, this paint is suitable for use on rigid plastic surfaces, as well as metal and glass fibre.
The paint should be touch dry in approximately 10-20 minutes after application.
The paint should be applied in temperatures between 15°C and 25°C for optimal results.
It is recommended to apply a minimum of two coats of Autotek Grey Primer for optimum adhesion and the best possible finish.
After each application, turn the aerosol can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
Yes, this paint is compatible with nearly all automotive paint finishes, including cellulose.
Shake the can thoroughly for at least 2 minutes before and during use. Ensure the nozzle is not blocked. Test spray on a scrap surface first.
Ensure the surface was properly cleaned and free from contaminants. Apply primer if recommended. Ensure application temperature is within the 15°C-25°C range.
Verify the Manufacturer Paint Code (A22, WA22 for BMW Sparkling Graphite). Ensure adequate coats have been applied and the primer used is compatible. Allow paint to fully cure before final assessment.
Always invert the can after spraying and press the nozzle for 2-5 seconds to clear residual paint.
**Preparation is key for optimal adhesion and finish. Ensure the target surface is clean, free from dirt, rust, wax, and oil. Mask off surrounding areas to prevent overspray. Applying a minimum of two coats of Autotek Grey Primer is recommended before using the Sparkling Graphite paint.
To apply, shake the aerosol can vigorously for at least two minutes. Hold the can 15-25cm away from the surface and apply in several thin coats, allowing 10-20 minute intervals between each application. After use, invert the can and spray for 2-5 seconds to clear the nozzle and prevent blockages.
This paint is compatible with BMW 1 Series, 3 Series, M3 & X6 models from 2007 onwards, and generally with nearly all automotive paint finishes. It can be used on metal, glass fibre, and rigid plastic surfaces. For best results and safety, use only outdoors or in a well-ventilated area when temperatures are between 15°C and 25°C.
