Plumbright Flanged Plug - 1/2 Inch - BFP12
Best current price£1.76from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£1.76Visit shop Plumbright Brass Flanged Plug 1/2 Bfp12
Visit shopCity Plumbing GB£1.76Visit shop One Offer
1 offer from £1.76
View price history by clicking the chart icon.
Product Information
Full details
The Plumbright Flanged Plug (BFP12) is designed for professional plumbers and DIY enthusiasts needing a reliable, secure seal for 1/2 inch plumbing lines. Its primary benefit is the specialized flanged design, which ensures easy installation and a tight, leak-proof fit for standard water systems. However, users should be aware that this plug is intended for specific 1/2 inch thread standards and may not be compatible with non-standard pipe configurations without proper adapters.
All features
| Model Part Number | BFP12 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
Is this plug compatible with plastic and metal pipes?
It is designed to fit standard 1/2 inch threaded fittings, regardless of whether the system is metal or rigid plastic, provided the threads are compatible.
Do I need to use thread sealant with this plug?
Yes, for the most secure and leak-proof seal, using Teflon tape or a suitable pipe thread compound is recommended.
Can this be used for gas lines?
The Plumbright BFP12 is primarily intended for water plumbing systems; please consult local building codes before using it in gas or fuel applications.
What tools do I need to install it?
A standard adjustable wrench or a pair of slip-joint pliers is usually sufficient for installation.
Is this reusable?
Yes, as long as the threads and the flange remain undamaged, the plug can be removed and reused in other compatible systems.
Troubleshooting
Plug is leaking after installation
Remove the plug, ensure the threads are clean, re-apply high-quality Teflon tape, and reinstall.
Difficulty threading the plug into the fitting
Check that you are not cross-threading and ensure the fitting is indeed a 1/2 inch standard size.
Plug becomes stuck after long-term use
Use a penetrating oil on the threads and allow it to sit for several minutes before attempting to remove it with a wrench.
Pros and Cons
Pros
- Easy to install thanks to the ergonomic flanged design
- Provides a highly secure, leak-resistant seal
- Constructed to meet professional plumbing standards
- Compatible with a wide range of standard 1/2 inch systems
Cons
- Limited to 1/2 inch sizing only
- Requires proper thread sealant for optimal long-term results
- Not intended for high-pressure industrial steam applications
Setup, Compatibility & Care
To install the Plumbright Flanged Plug, ensure the pipe threads are clean and free of debris. Apply an appropriate amount of plumbing tape or pipe thread sealant to the threads before screwing the plug into the fitting. Tighten with a standard wrench until snug; avoid over-tightening, which could damage the threads.
For maintenance, periodically inspect the plug for signs of corrosion or leakage if used in a long-term application. Compatibility is limited to standard 1/2 inch NPT/IPS thread types; verify your pipe specifications before installation.