Best current price£109.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£109.99Visit shop - 150mm Air Random Orbital Palm Sander & Dust Hose1/4" BspHook & Loop Pad
Visit shop3 offers from £109.99 - £124.99
View price history by clicking the chart icon.
This 150mm Air Random Orbital Palm Sander from Loops is designed for both DIY enthusiasts and professionals seeking efficient and smooth surface finishing. Its key benefit is the variable speed control and integrated dust collection system, which enhances user comfort and workspace cleanliness. A potential caveat is that it requires a compatible air compressor and suitable air supply for operation.
| Model Part Number | ys04538 |
|---|---|
| Brand | Loops |
You will need an air compressor that can provide at least 3 CFM (Cubic Feet per Minute) at 90 PSI (Pounds per Square Inch). A regulator is also recommended to maintain consistent pressure.
No, this sander features a self-generated vacuum system that uses its own air exhaust to pull dust into the included bag via the dust hose. It is not designed to connect to an external vacuum.
Please refer to the Loops warranty documentation for the specific warranty period. For assistance, contact Loops customer support.
Ensure the sander is disconnected from the air supply. Peel off the old disc from the hook-and-loop pad, and firmly press a new Ø150mm hook-and-loop disc onto the pad, ensuring it is centered.
An orbit size of Ø2.5mm indicates a relatively small orbital throw, which typically results in a smoother finish with fewer visible sanding marks, making it ideal for finishing applications.
The frequency of emptying the dust bag depends on the material being sanded and the duration of use. It is best to empty it when it is about two-thirds full to maintain optimal suction and performance.
Check air hose connection for leaks. Ensure the air compressor is delivering sufficient pressure (90psi). Verify the air inlet is not blocked. Check the variable speed lever is not fully closed.
Ensure the dust hose is securely connected. Check the dust bag for fullness and empty if necessary. Clean any blockages in the dust hose or vacuum outlet.
Ensure the sanding disc is properly secured to the pad. Check for any damage to the pad or internal components. Make sure the operating pressure is within the recommended range.
Clean both the back of the sanding disc and the hook-and-loop pad to remove any dust or debris. Ensure the disc is centered correctly.
Setup:
Compatibility:
Care:
