Best current price£25.99from Merlin Cycles
Shopping.co.uk recommended and popular offers
Merlin Cycles£25.99Visit shop Trickstuff Red Power Disc Brake Pads - / 250 - Shimano Xtr/Xt/Slx/Alfine
Visit shop1 offer from £25.99
View price history by clicking the chart icon.
The Tr!ckstuff Power Disc Brake Pads are designed for performance-focused mountain bikers and cyclists who demand maximum stopping power and precise modulation during technical riding. Engineered for superior stability on steep descents, these pads offer a consistent, high-performance braking experience, though they may require more frequent maintenance compared to standard organic compound pads.
| Series | Power |
|---|---|
| Model Part Number | TSBSPP250KX0000S |
| Brand | Trickstuff |
These pads are specifically designed for compatible Tr!ckstuff systems. Please verify your caliper model matches the product specifications.
Pads should be replaced when the friction material thickness reaches less than 0.5mm to ensure consistent performance and protect your rotors.
It is not required to sand the rotors, but it is highly recommended to clean them thoroughly with brake cleaner to remove old material.
Yes, the Power compound provides reliable performance in a variety of conditions, though pad wear may accelerate in muddy or gritty environments.
Typically, 10-15 controlled stops from a moderate speed are sufficient to transfer enough material to the rotor for optimal performance.
Check for rotor contamination, clean the rotors thoroughly with isopropyl alcohol, and ensure the pads are bedded-in correctly.
Inspect pads for remaining thickness and check for signs of glazing on the pad surface; if glazed, lightly sand with fine-grit sandpaper.
Check for air in the hydraulic lines and perform a system bleed if necessary, while also ensuring the caliper pistons are moving evenly.
To ensure optimal performance, proper installation is essential. Always clean your disc rotors with a dedicated brake cleaner before installing new pads to remove any existing residue or contaminants. After installation, it is critical to perform a proper bedding-in procedure by executing a series of controlled stops from moderate speed to transfer a thin layer of pad material onto the rotor surface. For maintenance, keep the braking surface free of oils, greases, and cleaning agents. If the brakes become contaminated, it is best to replace the pads immediately, as the high-performance compound can absorb impurities that degrade stopping power.
