Shopping.co.uk

Plumbright Endfeed Fitting Reducer - 10 x 8mm

Plumbright Endfeed Fitting Reducer - 10 x 8mm

Plumb Right End Feed Fitting Reducer Copper 10 mm x 8 mm fittings are of high quality, manufacture...

Best current price£0.52from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £0.52

View price history by clicking the chart icon.

City Plumbing GBPlumbright Endfeed Fitting Reducer Copper 10 X 8Mm 30012402
Free delivery in 1–3 days
£0.52
Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts needing to connect copper pipes of different sizes. The Plumbright Endfeed Fitting Reducer (10mm x 8mm) offers a high-quality, certified solution for creating reliable joints. While durable and certified, it requires soldering skills for proper installation.

All features

Model Part Number30012402
BrandPlumbright

Extended Product Information

FAQs

What standard are these fittings manufactured to?

These fittings are manufactured to EN1254-1 standards.

What certifications do these fittings have?

They hold Kitemark and WRAS certifications.

Can I use these fittings with push-fit connectors?

No, these are end feed fittings and require soldering. They are not compatible with push-fit or compression systems.

What size pipes does this reducer connect?

This reducer connects a 10mm copper pipe to an 8mm copper pipe.

What is needed to install this fitting?

You will need a blowtorch, solder wire, flux, and cleaning materials for the pipe and fitting.

Is this fitting suitable for all water systems?

Yes, it is suitable for standard hot and cold water plumbing systems.

Troubleshooting

Solder not flowing into the joint

Ensure the joint was heated sufficiently before applying solder. Check that both the pipe and fitting socket were thoroughly cleaned and fluxed. Ensure the correct type of solder is being used.

Leaking joint after soldering

The joint may not have been heated evenly or sufficiently, or solder may not have fully penetrated. The joint might need to be reheated and additional solder applied, or the fitting may need to be replaced.

Fitting becomes discolored

This is normal during the soldering process due to heat. Ensure surfaces are cleaned post-installation if aesthetic appearance is critical, but this does not affect performance.

Pros and Cons

Pros

  • High-quality copper construction ensures longevity.
  • Kitemark and WRAS certifications provide assurance of quality and safety.
  • Cost-effective method for joining different sized copper pipes.
  • Creates a neat and reliable soldered joint.
  • Easy to use for those with basic soldering skills.

Cons

  • Requires soldering skills and equipment for installation.
  • Not suitable for push-fit or compression plumbing systems.
  • Can be susceptible to damage if mishandled during installation.
  • Requires a clean and properly fluxed joint for optimal performance.

Setup, Compatibility & Care

Setup:

  1. Preparation: Cut the copper pipes to the required length and ensure the ends are clean, smooth, and free from burrs. Deburr the inside and outside of the pipe ends.
  2. Cleaning: Clean the socket of the fitting and the ends of the pipes to be joined using emery cloth or a pipe cleaning tool.
  3. Fluxing: Apply a thin, even layer of appropriate flux to both the cleaned pipe ends and inside the fitting socket.
  4. Assembly: Insert the pipes fully into the fitting sockets.
  5. Heating: Heat the joint evenly using a blowtorch. Focus the heat on the pipe closest to the fitting.
  6. Soldering: Once the joint is hot enough, apply solder wire to the opposite side of the fitting base. The solder should flow freely and be drawn into the gap by capillary action. Allow the solder to cool completely without disturbing the joint.

Compatibility:

  • Compatible with standard copper plumbing pipes.
  • Designed for use with lead-free solder and appropriate flux.
  • Suitable for use with hot and cold water systems.

Care:

  • Once installed, the fitting requires no specific ongoing care beyond regular plumbing system maintenance.
  • Avoid using abrasive cleaners or solvents on the exterior of the fitting, as this could damage any protective finishes or surrounding materials.

Price History

DatePrice
Visit shop