Supadec Stain Block 400Ml - White

Drying time can vary depending on application thickness and environmental conditions, but it typically dries to touch within 15-30 minutes and is ready for recoating after approximately 1-2 hours.

This product is primarily designed for interior use. For exterior applications, consult the manufacturer's recommendations for suitable exterior stain blockers.

Always use in a well-ventilated room. Open windows and doors to ensure fresh air circulation. If using in a confined space, consider using a fan to improve airflow.

Wipe up any wet product immediately with a cloth. Once dry, it may be difficult to remove. For uncured product, use a suitable solvent like white spirit; for cured product, mechanical removal may be necessary.

It is recommended to wait until the stain block has fully dried and is ready for recoating, typically 1-2 hours, before applying your top coat of paint for best results.

Coverage varies based on the severity of staining and application technique. A general guideline for light staining might be around 1-2 square meters per can.

Shake the can more vigorously. Ensure the nozzle is not blocked by clearing it as per instructions after each use and upon completion.

Apply a second coat after the first has dried completely. Ensure adequate coverage during application.

Mask off surrounding areas with tape and paper before spraying. Wipe away any fresh overspray immediately with a suitable solvent or damp cloth, depending on the surface.

Check that the nozzle is clear and properly attached. Ensure the can has not been excessively heated or stored improperly.