Feather Edge Fence Board - 1800 x 100 x 22mm - 20 Pack - B&Q

This pack of 20 brown UC3 pressure-treated softwood feather edge fence boards is designed for crea...

Best current price£62.40from B&Q

All Offers

2 offers from £62.40 - £64.00

View price history by clicking the chart icon.

B&Q - 22mm X 100mm Brown Treated Feather Edge Fence Board 1800mm (X20 Boards)
Free delivery in 1–3 days
£62.40
Visit shop
HomebaseBrown Treated 1800 x 100 x 22mm 20 Pack Feather Edge Fence Board
Free delivery in 1–3 days
£64.00
Visit shop

Product Information

Full details

Designed for homeowners and landscapers seeking a robust, professional-grade garden boundary, these UC3 pressure-treated softwood feather edge fence boards offer a reliable solution for building long-lasting closeboard fencing. Their signature tapered design allows for seamless overlapping, resulting in a structurally sound and private garden enclosure; however, users should note that as a natural timber product, some variations in wood grain and color are expected.

All features

BrandB&Q

Extended Product Information

FAQs

Are these boards pre-drilled?

No, these boards are not pre-drilled, allowing you to secure them exactly where needed on your rails.

Can I paint these boards?

Yes, once the boards have dried out completely following installation, they can be painted or stained with exterior-grade wood finishes.

What is the thickness of the boards?

The boards feature a tapered design ranging up to 22mm, which provides the necessary overlap and strength.

How many boards do I need for a 3-meter fence?

Depending on your desired overlap (typically 20-25mm), you will generally need approximately 10 to 12 boards per meter of fencing.

Is the pressure treatment safe for pets?

The pressure treatment used is standard for garden use, but it is recommended to avoid contact with vegetable patches and wash hands after handling the raw timber.

Troubleshooting

Boards are bowing or warping

Ensure they are fastened with at least three nails per horizontal rail to distribute tension evenly.

Black streaks appearing on the wood

This is often a reaction between non-galvanized nails and wood tannins; replace fasteners with stainless steel alternatives.

Gaps appearing between boards

This is normal during dry weather as wood loses moisture; if gaps are excessive, check that the initial overlap was sufficient.

Pros and Cons

Pros

  • Overlapping design ensures maximum privacy
  • Pressure-treated for extended outdoor service life
  • Easy to install on both timber and concrete post systems
  • Provides a classic, traditional aesthetic for garden boundaries
  • Highly wind-resistant due to the overlapping construction

Cons

  • Requires periodic maintenance treatments to preserve appearance
  • Natural wood may experience minor shrinkage or warping over time
  • Requires a significant amount of fasteners to ensure stability
  • Heavy package weight due to the 20-board count

Setup, Compatibility & Care

Installation requires a hammer, galvanized nails or a nail gun, and a spirit level to ensure vertical alignment. The boards are compatible with standard timber fence posts or slotted concrete posts when used with the appropriate rail system.

To ensure the longevity of your fencing:

  1. Ensure all cut ends are treated with a timber preservative to maintain the pressure-treated integrity.
  2. Use only stainless steel or hot-dipped galvanized nails to prevent rust streaking on the wood surface.
  3. Avoid installing boards directly into standing water; ensure proper drainage at the base of the fence line.
  4. Apply an annual water-repellent stain or preservative to keep the boards looking fresh and to prevent excessive moisture absorption.

Price History

DatePrice
Visit shop