Best current price£157.90from eBay
Shopping.co.uk recommended and popular offers
eBay£157.90Visit shop Fender Prewired Stratocaster Pickguard with Tex-Mex Pickups (Black)
Visit shop12 offers from £157.90 - £429.00
View price history by clicking the chart icon.
The Fender Stratocaster SSS Tex-Mex Pre-Wired Pickguard is designed for guitarists seeking an affordable yet high-performance upgrade to achieve a warm, vintage-inspired tone with modern versatility. This drop-in assembly features three Tex-Mex single-coil pickups, making it an excellent choice for players who need enhanced output for rock and blues without sacrificing classic Stratocaster dynamics. While installation is straightforward, it does require basic soldering skills to connect the output jack and ground wire, which may pose a minor hurdle for beginners uncomfortable with internal guitar electronics.
| Model Part Number | L70353.002 |
|---|---|
| Brand | Fender |
Not an expert, but you do need basic soldering skills. You must be comfortable working with a soldering iron to connect the output jack.
It is designed for standard 11-hole Fender Stratocasters. While it may fit many Squier models, hole alignment can occasionally vary, requiring minor modifications.
No, these are traditional single-coil pickups. However, the middle pickup is reverse-wound to provide hum-canceling in positions 2 and 4.
Yes, the pre-wired pickguard comes fully assembled with the plastic parts (knobs and switch tip) attached.
The Tex-Mex pickups are overwound, meaning you will experience a hotter output, more midrange punch, and a more aggressive bite compared to most standard-output vintage-style pickups.
Double-check your solder joints at the output jack; ensure the hot and ground wires are connected to the correct terminals.
Verify that your bridge ground wire is properly connected to the back of the volume pot or the tremolo claw.
Adjust the mounting screws on either side of each pickup to lower or raise them until you achieve the desired balance and sustain.
This pickguard is designed to fit most standard 11-hole Fender Stratocaster bodies. Installation involves removing your old pickguard, unscrewing the input jack plate, and de-soldering the existing wires. You will then need to solder the two main wires from the new Tex-Mex assembly to your output jack.
Care Tips:
