Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop Hycote Spray Paint Ford Purple Velvet Metallic 150ml + Grey Primer & Lacquer Kit
Visit shop3 offers from £16.99 - £17.99
View price history by clicking the chart icon.
This Hycote Spray Paint Kit is designed for DIY enthusiasts and hobbyists seeking a professional finish on various surfaces. Its key benefit is providing a high-quality, durable, and color-matched metallic finish with ease of use, thanks to its concentrated acrylic formula and compressed aerosol technology. A caveat is the smaller 150ml can size, which requires careful planning for larger projects. The kit includes primer, base coat, and lacquer for a complete system.
| Colour | Purple |
|---|---|
| Model Part Number | HYCPPLKIT56 |
| Brand | Hycote |
| Container Volume | 150ml |
This paint is suitable for most metal and rigid plastic surfaces. Ensure the surface is properly prepared and primed for best results.
Drying times vary depending on temperature, humidity, and film thickness. It is typically touch-dry within minutes, but full curing can take longer. Refer to can instructions for specific drying times between coats.
After use, invert the can and spray for a few seconds until clear propellant emerges. This will clear the nozzle and prevent blockages for future use.
Yes, the paint offers resistance to sunlight and color fading, making it suitable for outdoor applications. Ensure adequate ventilation during application.
The compressed aerosol technology in the 150ml cans provides coverage equivalent to conventional 300ml aerosols. Specific coverage will depend on the surface and application thickness.
Yes, it is compatible with OEM finishes, acrylic, and cellulosic paints. However, it is not recommended for use over unknown existing finishes without testing.
VOC compliant means the product meets regulations regarding Volatile Organic Compounds. This typically ensures lower environmental impact but may require better ventilation during use.
Ensure the can is adequately shaken. Clear any blockages in the nozzle by inverting the can and spraying for a few seconds after each use. Ensure consistent spray distance.
The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. Lightly abrading the surface before priming can improve adhesion.
Applying paint in excessively thick coats or holding the can too close to the surface can cause runs. Apply in thin, even coats and maintain the recommended spraying distance.
Apply paint in multiple thin coats rather than one thick coat. Ensure the can has been shaken sufficiently to mix the paint thoroughly.
Setup:
Compatibility:
This paint is compatible with OEM finishes, acrylic, and cellulosic paints. It is not recommended for use on polystyrene or other plastics without a suitable primer.
Care:
Store cans upright in a cool, dry place, away from direct sunlight and sources of ignition. Clean the spray nozzle immediately after use by inverting the can and spraying for a few seconds until clear propellant emerges. Avoid spraying near open flames or heat sources.
