Best current price£2,610.51from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£2,610.51Visit shop G.skill Ram Ripjaws S5 - Low Profile - 64 Gb (2 X 32 Gb Kit) - Ddr5 6000 Dimm Cl30
Visit shop2 offers from £2,610.51
View price history by clicking the chart icon.
The G.Skill Ripjaws S5 64GB DDR5 memory kit is a premium high-performance solution designed for enthusiasts, gamers, and content creators who require significant memory overhead for multitasking and demanding applications. Offering a tight CAS latency of 30 and a high clock speed of 6000 MHz, it provides a substantial performance boost for modern Intel-based platforms, though users must manually enable XMP 3.0 in their BIOS to achieve these advertised speeds.
| Series | Ripjaws |
|---|---|
| Model Part Number | F5-6000J3040G32GX2-RS5K |
| Brand | G.Skill |
While optimized for Intel platforms, it may work with AMD systems; however, you should check your motherboard's QVL (Qualified Vendor List) to ensure compatibility.
SPD speed (4800 MHz) is the universal standard for stability on initial boot. XMP speed (6000 MHz) is the high-performance overclocked setting that requires manual activation.
No, the integrated aluminum heatspreaders are designed to dissipate heat effectively under normal and heavy gaming loads.
Yes, its low-profile 33mm height is specifically designed to fit into space-constrained builds like Mini-ITX systems.
Yes, Intel XMP 3.0 allows you to save two user-defined profiles directly onto the memory modules via your motherboard's BIOS.
Access the BIOS and ensure that the Intel XMP 3.0 profile is enabled. The system will default to 4800 MHz if this is not manually set.
Your motherboard or CPU memory controller may not support the higher frequency. Try updating your BIOS to the latest version or manually lower the frequency slightly until stable.
Remove the modules and ensure they are fully seated in the RAM slots. Try testing one stick at a time to identify if a specific slot or module is problematic.
Installation is straightforward as this is an unbuffered DDR5 module set. To install, ensure your PC is powered off and unplugged. Insert the modules into the 2nd and 4th slots from the CPU for standard dual-channel operation on most motherboards.
Upon first boot, the memory will default to the standard SPD speed of 4800 MHz. To reach the rated 6000 MHz, enter your BIOS, locate the XMP settings, and enable the 'Profile 1' or 'Profile 2' XMP 3.0 settings. As a precaution, keep the system environment free of excessive dust to prevent the heatspreaders from losing their thermal efficiency. Since this kit operates at 1.4V, ensure your PC case has adequate airflow.
