Best current price£7.16from eBay
Shopping.co.uk recommended and popular offers
eBay£7.16Visit shop Summit Replacement Mirror Glass SRG-857 fits Seat various - RHS
Visit shop
B&Q£10.99Visit shop B&Q - Stick-On Standard Mirror Glass Right For Altea Cordoba Ibiza Leon Toledo
Visit shop14 offers from £7.16 - £12.50
View price history by clicking the chart icon.
The Summit Replacement Mirror Glass is an essential solution for vehicle owners looking to address damaged or shattered side-mirror glass without the expense of replacing the entire housing unit. Designed for DIY enthusiasts and drivers needing a quick road-legal fix, this mirror offers high-quality visibility and an exact fit, though users should note it is a surface-applied solution that requires a clean, stable base on the existing mirror to ensure a lasting bond.
| Model Part Number | SRG-857 |
|---|---|
| Brand | Summit |
Yes, provided the underlying surface is relatively flat and stable. If the old glass is jagged, you must sand or smooth it down first to ensure the adhesive makes proper contact.
No special tools are required, though a quality glass cleaner and a microfiber cloth are recommended for preparation.
This model is designed as a standard replacement glass. Please check your specific mirror housing capabilities; this glass may not transfer heat if the original heater element is damaged.
While it sticks immediately, it is best to allow 24 hours for the adhesive to reach full bonding strength.
Yes, as long as the mirror is securely attached, provides a clear view, and is not significantly cracked or distorted, it meets safety standards.
Ensure that the original surface was completely dry and free of debris before application. If loose, remove and replace the adhesive pad with an automotive-grade structural tape.
Verify your vehicle model compatibility with the SRG-857 part number. Ensure no shards of the old mirror are creating an uneven surface underneath.
To install the mirror, start by thoroughly cleaning the surface of the broken mirror with an alcohol-based glass cleaner to ensure all debris and oils are removed. Once dry, remove the protective film from the adhesive backing of the new mirror. Align it carefully with the existing housing edges and apply firm, even pressure across the entire surface for at least 30-60 seconds to set the adhesive. Avoid operating the vehicle or moving the mirror adjustment motors for at least 24 hours to allow the bond to cure fully. For maintenance, clean the surface periodically with standard automotive glass cleaner and a soft microfiber cloth to prevent scratching.
