Draper Sanding Drums and Holders - 08955

This set includes replacement sanding drums and their corresponding holders designed for the Draper D20 20V Engraver/Grinder (Stock No. 60508).

Yes, these are replacement accessories and require the Draper D20 20V Engraver/Grinder (Stock No. 60508) to function. They cannot be used independently.

Sanding drums are consumables and their lifespan depends on the frequency and intensity of use. Replace them when the abrasive surface is worn down and no longer effective, or if they become damaged.

No, these sanding drums and holders are specifically designed for and compatible only with the Draper D20 20V Engraver/Grinder, Stock No. 60508.

Typically, sanding drums are pushed onto the holder until they fit snugly. Refer to the main Draper D20 Engraver/Grinder manual for specific attachment instructions, as drum mounting can vary slightly.

These drums are suitable for a range of sanding and grinding tasks, including smoothing wood, shaping plastics, removing rust, and deburring metal edges.

Ensure you are using the correct drum and holder combination from the set and that both are free from debris. Check if the holder is properly attached to the engraver/grinder.

Verify that the sanding drum is correctly and securely mounted onto the holder, and that the holder is firmly attached to the engraver/grinder. Check for any damage to the drum or holder.

The sanding drum may be worn out. Replace it with a new one from the set. Ensure the correct grit of sandpaper is being used for the material and task.