Gutermann Deco Stitch 70 Thread - 700 Metres

The main advantage is its ability to create exceptionally beautiful and distinct ornamental stitches and backstitch seams with a noticeable 3D effect, due to its uniform, circular cross-section.

This thread is specifically designed for ornamental and decorative stitches. While high-quality, its No. 70 thickness might be too heavy for general seams on lightweight fabrics. It's best used for decorative elements where its unique properties can be showcased.

It is recommended to use a universal needle in size 90/14 or 100/16. For best results, especially with intricate decorative stitches, a Topstitch or Embroidery needle is also a good option.

Decorative threads often require slightly looser upper tension compared to standard threads. Always test your stitch on a fabric scrap and adjust the tension until you achieve a balanced and neat stitch.

While it can be used for decorative stitching on some embroidery machines, it is primarily marketed and optimized for use on household sewing machines for ornamental stitches. Always consult your embroidery machine's manual for thread compatibility.

Each spool of Gutermann Deco Stitch 70 contains 700 meters of thread.

This thread performs exceptionally well on medium to heavyweight fabrics such as cotton, denim, canvas, and linen, where its decorative effect can be most appreciated.

Ensure the needle is sharp and the correct size (90/14-100/16). Check that the thread is not snagged and is feeding smoothly from the spool. Adjust upper tension slightly looser. Ensure the presser foot pressure is not too high.

Verify the needle is inserted correctly and is not bent. Ensure you are using the correct needle type (e.g., Universal, Topstitch). Clean lint from the bobbin area and check bobbin winding.

Adjust upper thread tension – decorative threads often need looser tension. Ensure the fabric is feeding evenly. Try a different stitch length or width setting.

This can be normal for some decorative stitches. However, check if the thread is catching on the machine's feed dogs or tension discs. Ensure the thread is wound correctly on the spool and is feeding off smoothly.