Auto Extreme Primer Spray Paint Aerosol - Grey - 400ml
Not Available
Manufacturer: Rapide Products
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a reliable primer for automotive or general surface preparation. The Auto Extreme Grey Primer provides excellent adhesion and a uniform base for topcoats, ensuring a smooth and durable finish. A key consideration is its specific grey color, which may not be suitable for all projects without a compatible topcoat.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 7669 |
| Brand | Auto Extreme |
| Container Volume | 400ml |
Extended Product Information
FAQs
What surfaces can I use this primer on?
This primer is designed for use on most prepared surfaces including bare metal, old painted surfaces, wood, and many plastics. Always test on an inconspicuous area first, especially with plastics.
How long does it take for the primer to dry?
The drying time can vary based on temperature and humidity, but it is typically touch-dry within 10-15 minutes and ready for a topcoat within 30-60 minutes. Refer to the product label for specific drying times.
How many coats of primer should I apply?
It is generally recommended to apply 1-2 thin, even coats. Multiple thin coats provide better adhesion and coverage than one heavy coat. Allow drying time between coats.
Can I use this primer with any type of topcoat?
Yes, this grey primer is compatible with most common automotive and general-purpose topcoats, including acrylics, enamels, and lacquers. Always ensure the surface is fully dry before applying the topcoat.
What is the coverage area of a 400ml can?
Coverage can vary depending on application thickness and surface porosity, but a 400ml can typically covers approximately 1.5 to 2 square meters.
How should I store the primer spray can?
Store the can in a cool, dry place, away from direct sunlight, heat, and open flames. Ensure the nozzle is cleared after each use by spraying upside down.
Do I need to sand the surface after priming?
Sanding is usually not required after applying this primer unless you are trying to achieve an extremely smooth finish or if there are minor imperfections in the primer coat. A light scuff sand may be beneficial for certain topcoats.
Troubleshooting
Uneven spray pattern or splattering
Ensure the can is adequately shaken. Clean the nozzle by spraying upside down. Check for blockages in the nozzle or valve.
Primer not adhering to the surface
Ensure the surface was properly cleaned and prepared (degreased, de-rusted, and sanded if necessary). Test compatibility on a small, hidden area first.
Runs or drips on the surface
Apply in lighter, thinner coats. Maintain consistent distance from the surface and use a steady sweeping motion. Allow adequate drying time between coats.
Can does not spray
Shake the can vigorously for at least two minutes. Clear the nozzle by spraying upside down. Ensure the temperature is within the recommended application range (typically 15-25°C).
Pros and Cons
Pros
- Enhances topcoat adhesion and durability.
- Provides an excellent, even base coat for most paint colors.
- Quick drying formula speeds up project completion.
- Suitable for a wide range of materials.
- Generous 400ml volume for substantial coverage.
Cons
- Specific grey color may require careful topcoat selection.
- Requires proper ventilation during use.
- Aerosol application can sometimes lead to drips if not applied correctly.
Setup, Compatibility & Care
Setup:
- Ensure the surface to be painted is clean, dry, and free from grease, oil, and dust. Lightly sand surfaces for optimal adhesion.
- Shake the aerosol can vigorously for at least two minutes before use. Continue shaking periodically during application.
- Hold the can upright, approximately 25-30 cm (10-12 inches) from the surface.
- Apply in light, even coats, using a steady sweeping motion. Avoid over-application in one area.
- Allow each coat to dry for a few minutes before applying the next. Multiple thin coats are preferable to one heavy coat.
Compatibility:
This primer is suitable for use on most prepared surfaces including bare metal, old painted surfaces, wood, and many plastics. Always test on an inconspicuous area first, especially with plastics, to ensure compatibility.
Care:
After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent blockages. Store the can in a cool, dry place away from direct sunlight and sources of ignition.