Best current price£377.99from Cycles U.K.
Shopping.co.uk recommended and popular offers
Cycles U.K.£377.99Visit shop PRO VIBE Aero Carbon Compact Handlebar 41cm Black - Cycles UK
Visit shop3 offers from £377.99
View price history by clicking the chart icon.
This guide is for competitive road cyclists seeking to optimize their bike's aerodynamics and fit. The PRO VIBE Aero Carbon Handlebar offers the aerodynamic advantages of an integrated cockpit with the flexibility of a two-piece system. Its key features include T700 and T800 UD Carbon construction for a lightweight yet stiff feel, aerodynamic top sections for reduced drag, and compatibility with Shimano Di2 systems, including placement points for satellite shifters. A potential caveat is that proper stem selection is crucial for achieving the optimal fit, as it's a separate component.
| Model Part Number | PRSHA0615 |
|---|---|
| Brand | PRO |
The PRO VIBE Aero Carbon Handlebar has a clamp diameter of 31.8mm.
Yes, it is fully compatible with Shimano Di2 systems and includes placement points for satellite shifters.
The weight starts from approximately 250 grams, depending on the width.
For the 37cm width, the Reach is 77mm and the Drop is 126mm.
You must use a stem with a 31.8mm clamp diameter. For optimal performance and aesthetics, using a PRO Vibe Aero Stem is recommended.
Clean the anti-slip coating with a soft cloth and mild soap and water. Avoid harsh chemicals.
The width is measured center-to-center. At the hoods (top section), the 37cm bar measures 37cm C2C. At the drops, it flares slightly to 38cm C2C.
Ensure the stem clamp bolts are tightened to the manufacturer's recommended torque specification. Check that the handlebar is not damaged and is seated correctly within the stem.
Verify all Di2 cable connections are secure. Ensure the shifters are properly recognized by the Di2 system through the junction box.
Ensure the anti-slip coating is clean and free from grease or dirt. If the coating is worn, consider handlebar tape for added grip.
Apply a thin layer of carbon assembly paste to the interface between the handlebar and stem. Re-torque stem bolts to the correct specification.
Setup: The handlebar features a standard 31.8mm clamp diameter for stem compatibility. Ensure the PRO Vibe Aero Stem or a compatible stem is used. Torque specifications for the stem clamp bolts must be strictly adhered to, as over-tightening can damage the carbon, and under-tightening can lead to slippage. Install brake and shift levers according to manufacturer guidelines. For Di2 systems, route cables through designated ports and connect shifters and extensions if applicable.
Compatibility: This handlebar is compatible with 31.8mm stems. It is fully compatible with Shimano Di2 systems, including specific mounting points for Shimano satellite shifters.
Care: Clean the handlebar with mild soap and water. Avoid abrasive cleaners or solvents, which can damage the carbon fiber or anti-slip coating. Periodically check the stem clamp area for any signs of stress or damage. Store the bike in a dry place, protected from extreme temperatures and direct sunlight for extended periods.
