Vortice Extractor Fan - M 100/4" T Hcs

The humidity sensor automatically detects the level of moisture in the air. When condensation levels exceed the pre-set threshold, it activates the fan to extract the moist air, helping to prevent issues like mold and mildew.

Yes, the fan can be wired to operate in conjunction with your bathroom light switch. It will start when the light is turned on and can be set to continue running for a period after the light is switched off using the adjustable timer.

The timer function is adjustable between approximately 3 and 20 minutes. The specific method for adjustment will depend on the wiring configuration and may involve accessing internal settings during installation. Consult the installation manual for precise instructions.

The fan has a spigot diameter of 99mm and is designed to connect to standard 100mm diameter ducting.

No, the unit is Class II double insulated and does not require an earth connection for safe operation.

The IPX4 rating indicates that the fan is protected against splashing water from any direction, making it suitable for installation in typical bathroom environments.

No, ducting, grilles, and other necessary accessories are sold separately and must be purchased independently.

Check that the fan is correctly wired to the mains power supply. Verify the circuit breaker or fuse is active. If wired to a light switch, ensure the switch is on.

If connected to the light switch, ensure the switch is fully off. If operating via humidistat, check if the humidity level is consistently above the set threshold. Adjust the humidistat setting if necessary.

Inspect the fan grille and connected ducting for any blockages. Clean the grille and ensure the ducting is clear and securely attached.

Ensure the humidistat is set to an appropriate threshold. Check electrical connections to the humidistat function. The room humidity may not be high enough to trigger the sensor.