Best current price£13.96from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£13.96Visit shop Liberon Black 126821 Patinating Wax 250Ml
Visit shop
B&Q£19.60Visit shop B&Q - Black Patinating Wax 250Ml For Exquisite Interior Finishes And Furniture Restoration
Visit shop7 offers from £13.96 - £19.87
View price history by clicking the chart icon.
Liberon Black Patinating Wax is for DIY enthusiasts and furniture restorers looking to add an aged, rich finish to various surfaces. Its key benefit is the ability to enhance details and disguise imperfections for a sophisticated look, though it requires proper application techniques to avoid an overly dark or uneven finish. This 250ml wax provides a deep, dark tone suitable for wood, metal, gilt, plaster, tone, MDF, and papier-mâché, offering excellent coverage and a fast drying time.
| Model Part Number | 126821 |
|---|---|
| Brand | Liberon |
It is recommended to seal or prime unfinished wood before applying the patinating wax for a more even and predictable result. Applying directly to raw wood can lead to blotchiness and uneven absorption.
Apply the wax very thinly and wipe off any excess immediately with a clean cloth. You can also apply a clear wax over the black patinating wax once dry to lighten the overall tone.
The wax dries to the touch in about 5 minutes. However, it can take 24-48 hours for the wax to fully cure and harden. Avoid heavy use or applying a topcoat until fully cured.
It can be used on some painted surfaces, particularly matte or chalk-painted finishes, to add an aged effect. Always test on a small, inconspicuous area first to ensure compatibility and desired results.
No, this patinating wax itself is not waterproof. For surfaces that require water resistance, it is essential to apply a suitable waterproof topcoat or varnish after the patinating wax has dried and cured.
Clean brushes, cloths, and steel wool immediately after use with white spirit. Ensure good ventilation when using white spirit.
The approximate coverage is 8-12m² per litre. The 250ml tin should be sufficient for several small to medium-sized projects.
Ensure the wax was applied thinly and evenly. Wipe off excess wax immediately after application, or lightly buff with a clean cloth after drying. Consider applying a very thin topcoat of clear wax to even out the tone.
Attempt to remove excess wax using a clean cloth slightly dampened with white spirit. For significant over-application, you may need to strip the finish and reapply more carefully.
This indicates the wax has not fully dried or too much was applied. Allow more drying time in a well-ventilated area. Gently buff with a clean, dry cloth. Ensure a topcoat of clear wax or varnish is applied once fully dry.
The surface may not have been properly prepared (e.g., greasy, dusty, or previously coated with an incompatible finish). Ensure the surface is clean, dry, and suitable for waxing. For best results, ensure the base surface is sealed or finished.
Preparation: Ensure the surface is clean, dry, and free from dust, grease, or old finishes. For best results, the surface should be sound and previously finished or sealed.
Compatibility: Suitable for wood, metal, gilt, plaster, tone, MDF, and papier-mâché. Test on an inconspicuous area first, especially on delicate materials or previously unknown finishes.
Application: Apply sparingly using a brush, cloth, or fine steel wool. Work the wax into the surface, paying attention to details and contours. For a lighter effect, wipe off excess immediately. For a deeper effect, allow to dry and apply further thin coats. The wax dries in approximately 5 minutes.
Finishing: For enhanced durability and sheen, a subsequent topcoat of clear wax or a suitable varnish is recommended after the patinating wax has fully cured.
Tool Care: Clean brushes, cloths, and steel wool immediately after use with white spirit.
