Altura Vortex 1L Waterproof Bolt-On Top Tube Pack - Grey
The Altura Vortex Waterproof Bolt-On Top Tube Pack is an improved and updated version of a popular...The Altura Vortex Waterproof Bolt-On Top Tube Pack is an improved and updated version of a popular model. It includes pre-punched holes for direct bolting onto your bike's top tube or can be attached using removable straps. Your belongings will be well protected thanks to reinforced sides and base, while the waterproof, welded seam construction keeps them dry. The 1-litre capacity has an internal pocket for smaller items, and a cable port keeps things tidy. Made with polyamide ripstop fabric with TPU coating.
The Altura Vortex 1L Waterproof Bolt-On Top Tube Pack is designed for cyclists seeking a durable, weather-resistant storage solution for essentials. Its key benefit is secure, easy-access storage directly on the bike frame, keeping gear dry in adverse conditions. A potential caveat is the need for compatible frame mounting points for the bolt-on option. This pack offers robust protection with reinforced construction and a waterproof, welded-seam design, featuring an internal pocket and cable port for organization.
All features
Material
Polyester
Model Part Number
M4AFEB800001
Brand
Altura
Extended Product Information
FAQs
What is the material of the Altura Vortex pack?
The pack is made from polyamide ripstop fabric with a TPU coating.
How do I clean the pack?
Clean the pack with a damp cloth and mild soap. Avoid abrasive cleaners and do not machine wash.
What is the capacity of this top tube pack?
The pack has a capacity of 1 litre.
Can I mount this pack on any bike?
It can be mounted using straps on most bikes. For bolt-on mounting, your bike's top tube must have pre-drilled and threaded holes.
Does it come with mounting hardware?
The pack includes removable straps. Bolts for the bolt-on method are typically not included and should be sourced separately if needed.
Is the pack suitable for all weather conditions?
Yes, the pack features a waterproof, welded seam construction designed to keep your belongings dry in wet conditions.
Can I charge my phone while it's in the pack?
Yes, the pack has a cable port that allows you to route a charging cable from a power bank inside the pack to your device.
Troubleshooting
Pack shifts during ride (strap mount)
Ensure straps are tightened securely. Consider adding a thin layer of grip tape to the underside of the pack where it contacts the frame for better friction.
Water ingress despite being 'waterproof'
Verify that all seams are properly sealed and the main zipper is fully closed. Check the cable port for any obstructions.
Bolt-on mounts do not align with frame
This pack is designed for specific bolt patterns. If alignment is an issue, utilize the strap mounting method instead. Frame modification is not recommended.
Difficult to open/close zipper
Ensure no fabric is caught in the zipper. Clean the zipper teeth and apply a silicone-based lubricant if necessary.
Strap attachment might shift on very rough terrain.
Limited color options.
Setup, Compatibility & Care
Setup:
Bolt-On Method: Align the pack with the pre-drilled holes on your bike's top tube. Secure using appropriate bolts (not included). Ensure a snug fit without overtightening.
Strap Method: Thread the included removable straps through the designated loops on the pack. Wrap the straps around the top tube and seat tube (if applicable) and secure them firmly.
Compatibility:
Compatible with most bicycle top tubes. Bolt-on requires frame to have corresponding threaded eyelets.
Ensure sufficient clearance between the pack and handlebars, especially when turning.
Care:
Clean with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
Do not machine wash or tumble dry.
Allow to air dry completely before storing.
Periodically check strap integrity and bolt tightness.