Make a splash with Rust-Oleum Bathroom Wall & Ceiling Paint. This water-resistant paint is designe...Make a splash with Rust-Oleum Bathroom Wall & Ceiling Paint. This water-resistant paint is designed for bathroom walls and ceilings to withstand moisture and high levels of condensation, leaving a beautiful modern, matt finish. The premium, water-based formula is virtually odourless and available in 100+ stunning colours to match any bathroom colour scheme. It can be easily applied by brush or roller to bare plaster, brick or concrete walls, and directly over previously painted walls. Rust-Oleum Bathroom Wall Paint resists cracking, peeling & blistering for up to 6 years before first maintenance when applied according to label instructions. It is water-resistant but not suitable for shower enclosures or areas in constant contact with water. The paint is scrubbable for easy cleaning (Tested to ISO 11998 Class 1 Wet Scrub Rated). Coverage is 12m² per litre. For best results, apply two coats. Available in 100+ colours and comes in a 2.5L tin.
This guide is designed for homeowners and DIY enthusiasts looking to refresh their bathrooms with a durable and stylish paint. Rust-Oleum Bathroom Wall & Ceiling Paint in Tiger Tea offers a water-resistant, matte finish that resists cracking and peeling. However, it's not suitable for areas with constant water exposure, such as shower enclosures.
All features
Colour
Orange
Brand
Rust-Oleum
Extended Product Information
FAQs
How long does it take for the paint to dry?
Refer to the product label for specific drying times, but generally, allow several hours between coats and for complete curing.
Can I use this paint in a shower?
No, this paint is not suitable for areas with direct and constant water contact, like inside showers. It is designed for walls and ceilings where moisture and condensation are common.
How much paint do I need?
Coverage is approximately 12m² per liter. Calculate the surface area of your walls and ceiling to determine how much paint you'll need, and remember to apply two coats.
What kind of finish does this paint have?
The paint has a modern matte finish.
How do I clean the painted surfaces?
Clean spills and splashes immediately with a damp cloth. For general cleaning, use a mild detergent and a soft cloth. Avoid abrasive cleaners.
What colors are available?
The paint is available in 100+ colors.
What is the paint made of?
The paint is a premium, water-based formula.
What is the size of the paint tin?
The paint comes in a 2.5L tin.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared. Clean, dry, and lightly sand glossy surfaces. Apply a primer if necessary and let it dry before applying the paint.
Paint finish is not even.
Apply the paint in thin, even coats. Avoid applying too much paint at once. Use a high-quality brush or roller.
Paint is peeling or blistering.
Make sure the surface is completely dry and clean before painting. Ensure the paint is applied correctly with proper drying time between coats.
Pros and Cons
Pros
Water-resistant formula ideal for bathroom environments.
Provides a stylish matte finish.
Available in a wide range of colors.
Easy to apply with a brush or roller.
Durable and long-lasting, reducing the need for frequent repainting.
Low odor, making it more pleasant to use.
Cons
Not suitable for areas with direct and constant water contact, like inside showers.
Requires two coats for optimal results.
Color accuracy may vary slightly depending on the application and surface.
Surface preparation is essential for the best results.
May require more than one tin depending on the size of the room.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, grease, and mildew. Lightly sand glossy surfaces to improve adhesion.
Application: Stir the paint thoroughly before use. Apply two even coats using a brush or roller. Allow sufficient drying time between coats (as indicated on the product label).
Compatibility: This paint is compatible with bare plaster, brick, concrete walls, and previously painted walls. However, ensure the existing paint is sound and well-adhered.
Care: Clean spills and splashes immediately with a damp cloth. For general cleaning, use a mild detergent and a soft cloth. Avoid abrasive cleaners that may damage the paint finish. Always refer to the product label for specific care instructions.