Faithfull Small Paint Mixing Paddle - 60 x 400mm
Best current price£11.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£11.00Visit shop Faithfull Small Paint Mixing Paddle 60 X 400Mm - Multi Colour
Visit shopThe Range£11.00Visit shop All Offers
2 offers from £11.00 - £11.95
View price history by clicking the chart icon.
The RangeFaithfull Small Paint Mixing Paddle 60 X 400Mm - Multi Colour
£4.99 delivery
£11.00
Visit shop
B&QB&Q - Small Paint Mixing Paddle 60 X 400mm Multi Colour (One Size)
Free delivery in 1–3 days
£11.95
Visit shop
Product Information
Full details
The Faithfull Small Paint Mixing Paddle is an essential tool for DIY enthusiasts and professionals tasked with blending paint volumes between 1 and 5 litres. It provides the key benefit of rapid, uniform color consistency through its balanced design, though users should note it requires a power drill with at least 400W of power to function effectively. This robust 60mm by 400mm accessory attaches directly to standard power drills, ensuring that your paint is perfectly mixed without the physical strain of manual stirring.
All features
| Model Part Number | 1405192 |
|---|---|
| Brand | Faithfull |
Extended Product Information
FAQs
Can I use this for mixing concrete or plaster?
No, this paddle is designed for paint and similar light-viscosity liquids. Using it for thick materials like plaster may damage the tool or overload your drill.
Does it fit into a standard cordless drill?
Yes, as long as your drill chuck can open to accept an 8mm shank and the drill motor is powerful enough.
How do I prevent rust on the metal?
Always clean and dry the paddle thoroughly immediately after use and store it in a dry environment.
Can I use this with a high-speed impact driver?
While the hex shank might fit, impact drivers provide high-torque pulses which are not ideal for smooth mixing. A standard drill is highly recommended.
What is the maximum paint volume it can handle?
The paddle is optimized for volumes between 1 and 5 litres.
Troubleshooting
Drill stalling during use
Ensure your drill meets the 400W requirement or reduce the speed setting on your drill.
Paint splattering out of the can
Always submerge the paddle head completely before turning on the drill and operate at the lowest possible speed.
Shank slipping in the chuck
Ensure the chuck is tightened securely around the hexagon shank and that the drill is set to drill mode, not hammer mode.
Pros and Cons
Pros
- Ensures a perfectly smooth and consistent paint finish
- Significantly faster than manual hand-mixing
- Balanced design minimizes vibration during operation
- Compatible with standard drill chucks via the 8mm hex shank
- Sturdy construction for long-term reliability
Cons
- Not suitable for drills under 400W as it may stall
- Limited to smaller volumes (1-5 litres)
- Requires careful cleaning immediately after use to prevent paint hardening
- Not intended for heavy-duty mortars or concrete
Setup, Compatibility & Care
To set up the tool, open your drill's chuck, insert the 8mm hexagon shank, and tighten firmly. Ensure your drill is set to a low speed, as high speeds may cause paint to splatter outside the container. This paddle is compatible with any corded or cordless power drill that accepts an 8mm shank and provides at least 400W of power.
Care and maintenance are straightforward: immediately after use, place the paddle head in a bucket of warm soapy water (or the appropriate solvent if using oil-based paints) and run the drill briefly to spin off the remaining paint. Wipe the shank dry to prevent rust and store in a cool, dry place.