TYPY Headlight for BMW 4 Series F32 F36 2013-2015 - TYPY
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The TYPY Headlight Assembly is designed for owners of 2013-2015 BMW 4 Series F32 and F36 models looking to modernize their front-end aesthetics while improving nighttime visibility. This direct-replacement unit features high-efficiency LED technology and iconic Angel Eye Daytime Running Lights, offering a sharp, factory-style upgrade. While it provides a significant boost in performance and style, users should note that installation requires basic mechanical knowledge and careful alignment to ensure the beam pattern remains compliant with local road safety regulations.
All features
| Brand | TYPY |
|---|
Extended Product Information
FAQs
Will this fit a 2016 BMW 4 Series?
No, this specific assembly is designed only for the 2013-2015 F32 and F36 models.
Is any wiring modification required?
No, this is designed to be a direct replacement using the existing factory wiring harness.
Do the Angel Eyes function as turn signals?
No, the turn signals are integrated into the headlight assembly but remain separate from the Angel Eye DRL circuit.
Are these legal for road use?
The assembly is designed with a standard beam pattern; however, always check local laws regarding aftermarket automotive lighting.
How do I ensure the lenses don't yellow over time?
The lenses come with a factory UV coating. Avoid using harsh chemical cleaners, and consider applying a clear paint protection film for extra longevity.
Troubleshooting
Headlight flickering upon startup
Ensure all wire harnesses are fully seated and clicked into place. If the issue persists, check for ground connection stability.
Beam pattern is too high or low
Locate the mechanical adjustment screw on the back of the housing and turn it clockwise or counter-clockwise to align the beam height.
Condensation inside the lens
Ensure the venting caps are clear of debris. Minor condensation can occur due to temperature changes, but persistent fogging may indicate an improper seal.
Pros and Cons
Pros
- Significantly updates the vehicle's aesthetic with modern LED styling
- Improved light output for better visibility during night driving
- Perfectly matches the fitment of F32/F36 2013-2015 BMW models
- Projector lenses prevent light scatter, increasing safety
- Energy-efficient design reduces strain on the vehicle's electrical system
Cons
- Requires proper alignment post-installation to avoid blinding other drivers
- Not compatible with BMW models outside the 2013-2015 year range
- Installation may require removal of the front bumper
- Professional installation recommended to ensure proper seal against moisture
Setup, Compatibility & Care
This assembly is a direct, plug-and-play replacement for the 2013-2015 BMW 4 Series F32 (Coupe) and F36 (Gran Coupe).
- Preparation: Disconnect the vehicle's negative battery terminal to prevent electrical shorts.
- Removal: Carefully remove the front bumper to gain access to the headlight housing mounting bolts.
- Installation: Unplug the old wiring harnesses, swap them to the new TYPY unit, and secure the housing using the original mounting points.
- Testing: Before fully reassembling the bumper, test the low beams, high beams, and turn signals to ensure proper connectivity.
- Care: Clean the lenses using a soft microfiber cloth and mild automotive-grade cleaner. Avoid harsh solvents that could degrade the UV-resistant coating on the lens surface. Check seals periodically to ensure no condensation is forming inside the unit.