Best current price£33.33from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£33.33Visit shop 2 Pcs Led Bulb P21/5W 12-24V Canbus -, Bicolor Usa Orange/Red 5901414687090
Visit shop1 offer from £33.33
View price history by clicking the chart icon.
The motoLEDy BAY15D LED bulb set is an essential upgrade for owners of vehicles imported from the USA or Japan, designed to simplify the conversion of red rear turn signals to the orange light required by European standards. Featuring 57 high-efficiency SMD 2835 LEDs and an integrated CANBUS system, these bulbs provide superior brightness and error-free compatibility for modern vehicle electronics, though users must be aware that they are intended strictly for off-road use and are not certified for public road traffic.
| Model Part Number | 749 |
|---|---|
| Brand | motoLEDy |
No, these bulbs are designed exclusively for off-road use and do not meet the ECE requirements for public road traffic.
These are designed to replace P21/5W and 1157 style bulbs. Please verify your vehicle's current bulb type before purchasing.
The CANBUS system communicates with the car's computer to simulate the power draw of a traditional bulb, preventing false 'bulb burned out' alerts on the dashboard.
These LEDs are rated for up to 50,000 hours of operation, significantly outlasting standard incandescent or halogen bulbs.
Yes, they are compatible with both standard 12V automotive systems and 24V systems found in larger vehicles.
Ensure the bulb is fully seated in the socket; if the error persists, check that the vehicle's electrical system does not require an additional load resistor.
LEDs are polarity sensitive. Remove the bulb, rotate it 180 degrees, and re-insert into the socket.
Installation follows a standard 'plug-and-play' procedure. Simply access the rear tail light assembly, remove the existing P21/5W or 1157 bulb, and insert the motoLEDy LED unit into the socket. Due to the orientation-sensitive nature of LEDs, if the bulb fails to light up immediately, remove it, rotate it 180 degrees, and re-insert. Since these bulbs generate less heat than halogen equivalents but are high-power units, ensure the assembly is dry and the socket contacts are free of corrosion to maintain a solid electrical connection over the bulb's 50,000-hour lifespan.
